Am Freitag, den 14.06.2013, 08:29 +0200 schrieb Alexander Aring:
> Hi,
>
> On Fri, Jun 14, 2013 at 12:40:39AM +0200, Christoph Fritz wrote:
> > This patch adds omap4 display controller support.
> >
> > Signed-off-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
> > ---
> > changes since v2:
> > - use dev_request_mem_region_by_name()
> > changes since v3:
> > - remove register struct
> > - use uncached screen_base
> > ---
> > arch/arm/mach-omap/Makefile | 1 +
> > arch/arm/mach-omap/include/mach/omap4-fb.h | 46 +++
> > arch/arm/mach-omap/omap4_fb.c | 27 ++
> > drivers/video/Kconfig | 8 +
> > drivers/video/Makefile | 1 +
> > drivers/video/omap4.c | 505 ++++++++++++++++++++++++++++
> > drivers/video/omap4.h | 179 ++++++++++
> > 7 files changed, 767 insertions(+)
> > create mode 100644 arch/arm/mach-omap/include/mach/omap4-fb.h
> > create mode 100644 arch/arm/mach-omap/omap4_fb.c
> > create mode 100644 drivers/video/omap4.c
> > create mode 100644 drivers/video/omap4.h
> >
> > diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
> > index 94e42c6..e70ddbd 100644
> > --- a/arch/arm/mach-omap/Makefile
> > +++ b/arch/arm/mach-omap/Makefile
> > @@ -28,6 +28,7 @@ obj-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
> > pbl-$(CONFIG_OMAP3_CLOCK_CONFIG) += omap3_clock.o
> > obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
> > obj-$(CONFIG_SHELL_NONE) += xload.o
> > +obj-$(CONFIG_DRIVER_VIDEO_OMAP4) += omap4_fb.o
> > obj-$(CONFIG_I2C_TWL6030) += omap4_twl6030_mmc.o
> > obj-$(CONFIG_OMAP4_USBBOOT) += omap4_rom_usb.o
> > obj-y += gpio.o
> > diff --git a/arch/arm/mach-omap/include/mach/omap4-fb.h b/arch/arm/mach-omap/include/mach/omap4-fb.h
> > new file mode 100644
> > index 0000000..5c0a54b
> > --- /dev/null
> > +++ b/arch/arm/mach-omap/include/mach/omap4-fb.h
> > @@ -0,0 +1,46 @@
>
> ...
>
> > + fb_write(1, fbi->dispc, O4_DISPC_VID1_PIXEL_INC);
> > +
> > + fb_write(0xfff, fbi->dispc, O4_DISPC_VID1_PRELOAD);
> > +
> > + fb_write(DSS_DISPC_VIDn_ATTRIBUTES_VIDFORMAT(fmt) |
> > + DSS_DISPC_VIDn_ATTRIBUTES_VIDBURSTSIZE_8x128 |
> > + DSS_DISPC_VIDn_ATTRIBUTES_ZORDERENABLE |
> > + DSS_DISPC_VIDn_ATTRIBUTES_CHANNELOUT2_SECONDARY_LCD,
> > + fbi->dispc, O4_DISPC_VID1_ATTRIBUTES);
> > +
> > + while (fb_read(fbi->dispc, O4_DISPC_CONTROL2) & DSS_DISPC_CONTROL_GOLCD)
> > + ; /* noop */
>
> For busy waiting on statusbits I would prefer a mechanism like this:
>
> start = get_time_ns();
> while (condition) {
> ...
> if (is_timeout(start, waiting_time)) {
> dev_err(dev, "foo"
> return -ETIMEOUT;
> }
> mdelay(interval);
> ...
> }
There is also a convenience wrapper: wait_on_timeout(timeout, condition)
Jan
>
> I mean it avoid deadlocks in barebox and it's better to start linux
> without a display instead of a deadlock in barebox.
> On the other hand you need a waiting_time which works with all displays
> together. Don't know if there any hardware dependency.
>
> }
> > +
> > + fb_write(fb_read(fbi->dispc, O4_DISPC_CONTROL2) |
> > + DSS_DISPC_CONTROL_GOLCD,
> > + fbi->dispc, O4_DISPC_CONTROL2);
> > +
> > + fbi->cur_display = new_display;
> > + info->xres = mode->xres;
> > + info->yres = mode->yres;
> > +
> > + rc = 0;
> > +
> > +out:
> > + return rc;
> > +}
>
> ...
>
> > +
> > + omap4fb_reset(fbi);
> > +
> > + dev_add_param(fbi->dev, "bootargs", NULL, NULL, 0);
> > +
> Jean-Christophe PLAGNIOL-VILLARD said why we need this here in the last
> mails. I don't saw any answer to this and asking myself... what do this
> function?
>
> Regards
> Alex
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
