This breaks HSIC and has no good justification why this would
be needed for ULPI.
This reverts commit 2e7d66f526217f6ff3167e4580aecb9548a0de33.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
drivers/usb/imx/chipidea-imx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
index 928ebf3..4ee7610 100644
--- a/drivers/usb/imx/chipidea-imx.c
+++ b/drivers/usb/imx/chipidea-imx.c
@@ -148,13 +148,13 @@ static int imx_chipidea_probe(struct device_d *dev)
ci->data.post_init = imx_chipidea_port_post_init;
ci->data.drvdata = ci;
+ imx_chipidea_port_init(ci);
+
portsc = readl(base + 0x184);
portsc &= ~MXC_EHCI_PORTSC_MASK;
portsc |= ci->flags & MXC_EHCI_PORTSC_MASK;
writel(portsc, base + 0x184);
- imx_chipidea_port_init(ci);
-
if ((ci->flags & MXC_EHCI_PORTSC_MASK) == MXC_EHCI_MODE_ULPI) {
dev_dbg(dev, "using ULPI phy\n");
if (IS_ENABLED(CONFIG_USB_ULPI)) {
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
