Hi Eric Bénard, Thank you very much for your answer and your help ! Le 04/01/2013 14:28, Eric Bénard a écrit : > Hi Mylène, > > Le Fri, 4 Jan 2013 13:46:15 +0100, > "Mylene Josserand"<Mylene.Josserand@xxxxxxxxxxx> a écrit : >> I will search deeper in the code the possible problem but if you have an >> idea of it, do not hesitate ! >> > did you check : > - the pin mux is properly configured for MII operations (on the right > pins connected to the PHY of course), I will check that ! > - the reset pin is deasserted before probing the PHY, > - the FEC's clock is enabled, I checked and the clock is enabled. > > Last thing, if you set phy_addr = -1, then IIRC the PHY address will be > probed automatically. I tried it and it fixes the problem ! Maybe the phy_adress was not 1 as Thomas Petazonni indicated but according to LAN8700 documentation, it should. I will search which phy_address is currently the good one. Anyway, thank you Thomas Petazonni and Eric Bénard for your help ! > > Best regards, > Eric Best regards, -- Mylène JOSSERAND _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
