Dear Mylene Josserand,
Good to see some developers from Toulouse using Barebox! I'm close, in
Colomiers.
On Fri, 4 Jan 2013 10:09:05 +0100, Mylene Josserand wrote:
> I am using the master branch (maybe I need to checkout a tag ?). The
> ethernet of my board is a SMSC LAN8700 and the microchip is iMX27.
>
> I have configured the new source of barebox to use the Phylib and MII
> drivers. When my barebox starts, I have an error about the PHY driver :
Which board are you targeting?
> The SMSC LAN8700 is here but I can not make it work !
>
> I have added some prints on the phy.c and the problem is in the fonction
> "mdiobus_scan" :
>
> if (!edev->phydev) {
> if (addr >= 0) {
> dev = mdiobus_scan(bus, addr);
> if (!dev) { << Failed here
> ret = -EIO;
> goto fail;
> }
>
> Did I miss something ?
Do you have a correct PHY address in the fec_platform_data structure in
your board file?
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
