On 12:44 Wed 19 Dec , Jerzy Grzegorek wrote: > Hi, > > I was trying to run barebox-2012.12.1 under linaro-qemu 2012.12, for > beagleboard. > > I build MLO (omap3530_beagle_xload_defconfig) and barebox-flash-image > (omap3530_beagle_defconfig). > > I prepared two partitions sd image - beagle.sd.img (first partition FAT : > MLO, barebox.bin, barebox-flash-image, zImage; second partition EXT3 : > rootfs). > > I run linaro-qemu > > qemu-system-arm -M beagle -m 256M -nographic -sd beagle.sd.img > > and I got > > barebox 2012.12.1 #1 Wed Dec 19 08:35:21 CET 2012 > > Board: Texas Instrument's Beagle > NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba ( ), page size: 2048, > OOB size: 64 > omap-hsmmc omap-hsmmc0: registered as omap-hsmmc0 > mci mci0: registered disk0 > malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB) > stack space: 0x4020f000 -> 0x4020fc00 (size 3 kB) > unknown boot source. Fall back to nand > booting from NAND > failed to get image size > booting failed > > next qemu freezes. > > Any idea? I guess qemu does not set the boot register correctly so barebox can not detect that you want to boot from sd and falback to nand Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
