Hi,
I was trying to run barebox-2012.12.1 under linaro-qemu 2012.12, for beagleboard.
I build MLO (omap3530_beagle_xload_defconfig) and barebox-flash-image (omap3530_beagle_defconfig).
I prepared two partitions sd image - beagle.sd.img (first partition FAT : MLO, barebox.bin, barebox-flash-image, zImage; second partition EXT3 : rootfs).
I run linaro-qemu
qemu-system-arm -M beagle -m 256M -nographic -sd beagle.sd.img
and I
got
barebox 2012.12.1 #1 Wed Dec 19 08:35:21 CET 2012
Board: Texas Instrument's Beagle
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba ( ), page size: 2048, OOB size: 64
omap-hsmmc omap-hsmmc0: registered as omap-hsmmc0
mci mci0: registered disk0
malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB)
stack space: 0x4020f000 -> 0x4020fc00 (size 3 kB)
unknown boot source. Fall back to nand
booting from NAND
failed to
get image size
booting failed
next qemu freezes.
Any idea?
Thanks,
Jurek
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
