a bit embarrassed but, all of a sudden, what used to work just fine in terms of building and booting barebox on my beagleboard xM (rev C) doesn't work anymore. not that long ago, i documented how easy this was here: http://www.crashcourse.ca/wiki/index.php/BeagleBoard-xM#Barebox_for_the_xM absolutely nothing out of the ordinary as i remember it. so, when this worked, the boot looked like what you see here: http://www.crashcourse.ca/wiki/index.php/BeagleBoard-xM#Booting_to_Barebox_on_your_xM_--_it_actually_works now, the boot process produces: barebox 2012.11.0-00305-g159109f #1 Sat Dec 1 15:51:00 EST 2012 Board: Texas Instrument's Beagle NAND type unknown: ff,ff No NAND device found (-19)! gpmc_nand gpmc_nand0: probe failed: error 6 omap-hsmmc omap-hsmmc0: registered as omap-hsmmc0 mci mci0: registered disk0 malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB) stack space: 0x4020f000 -> 0x4020fc00 (size 3 kB) booting from MMC1 ... and hangs, suggesting that the MLO file is fine, but it's barebox.bin that simply fails. am i missing something painfully obvious? rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ======================================================================== _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
