Hi Robert, On Sat, Dec 01, 2012 at 04:18:08PM -0500, Robert P. J. Day wrote: > > a bit embarrassed but, all of a sudden, what used to work just fine > in terms of building and booting barebox on my beagleboard xM (rev C) > doesn't work anymore. > > not that long ago, i documented how easy this was here: > > http://www.crashcourse.ca/wiki/index.php/BeagleBoard-xM#Barebox_for_the_xM > > absolutely nothing out of the ordinary as i remember it. so, when > this worked, the boot looked like what you see here: > > http://www.crashcourse.ca/wiki/index.php/BeagleBoard-xM#Booting_to_Barebox_on_your_xM_--_it_actually_works > > now, the boot process produces: > > barebox 2012.11.0-00305-g159109f #1 Sat Dec 1 15:51:00 EST 2012 > > > Board: Texas Instrument's Beagle > NAND type unknown: ff,ff > No NAND device found (-19)! > gpmc_nand gpmc_nand0: probe failed: error 6 > omap-hsmmc omap-hsmmc0: registered as omap-hsmmc0 > mci mci0: registered disk0 > malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB) > stack space: 0x4020f000 -> 0x4020fc00 (size 3 kB) > booting from MMC1 > > ... and hangs, suggesting that the MLO file is fine, but it's > barebox.bin that simply fails. I just rechecked, current master works fine for me on my beagle (no xM though). Just a guess, have you used the barebox-flash-image link instead of barebox.bin? Since the image is compressed now it becomes important to use the link (which points to the compressed image). Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
