On Tue, Aug 28, 2012 at 08:40:57AM +0200, gregory hermant wrote:
> Signed-off-by: Gregory Hermant <gregory.hermant@xxxxxxxxxxxxxxxxx>
The commmit log is a bit sparse. It would be interesting if this is an
enhancement, fixes a problem, is needed on newer board revisions...
Sascha
> ---
> arch/arm/boards/tny-a926x/init.c | 2 +-
> arch/arm/boards/usb-a926x/init.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boards/tny-a926x/init.c b/arch/arm/boards/tny-a926x/init.c
> index d58132a..5538a44 100644
> --- a/arch/arm/boards/tny-a926x/init.c
> +++ b/arch/arm/boards/tny-a926x/init.c
> @@ -89,7 +89,7 @@ static struct sam9_smc_config tny_a9g20_nand_smc_config = {
> .ncs_read_pulse = 4,
> .nrd_pulse = 4,
> .ncs_write_pulse = 4,
> - .nwe_pulse = 2,
> + .nwe_pulse = 4,
>
> .read_cycle = 7,
> .write_cycle = 7,
> diff --git a/arch/arm/boards/usb-a926x/init.c b/arch/arm/boards/usb-a926x/init.c
> index 7e63876..00a215d 100644
> --- a/arch/arm/boards/usb-a926x/init.c
> +++ b/arch/arm/boards/usb-a926x/init.c
> @@ -90,7 +90,7 @@ static struct sam9_smc_config usb_a9g20_nand_smc_config = {
> .ncs_read_pulse = 4,
> .nrd_pulse = 4,
> .ncs_write_pulse = 4,
> - .nwe_pulse = 2,
> + .nwe_pulse = 4,
>
> .read_cycle = 7,
> .write_cycle = 7,
> --
> 1.5.6.3
>
>
>
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
