On Fri, Aug 24, 2012 at 9:32 PM, Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote: > On 24 August 2012 18:19, Calvin Johnson <linux.cj@xxxxxxxxx> wrote: >> Hi, >> >> In U-Boot there is "nand dump <address>" command which is very useful >> to check the contents of the NAND page and OOB area. >> >> I tried searching for an alternative in Barebox, and found that we can >> use some thing like "md -b -s /dev/nand0.barebox.bb". But this will >> dump only 0x100 bytes. In order to increase the size, I need to >> compile again. >> Is there any way to dump more bytes from the NAND flash and from >> different blocks/pages? >> > > please try "md -b -s /dev/nand0.barebox.bb <dump offset>+<dump size>", > e.g. > md -b -s /dev/nand0.barebox.bb 0+0x200 Thanks a lot Antony. It worked out. :)- > >> How are the experts working with this? >> > > Sorry, I'm not an expert :))) :)- For me you are an expert. > -- > Best regards, > Antony Pavlov _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
