On Thu, May 31, 2012 at 03:12:08PM +0200, Roberto Nibali wrote:
> Hi
>
>
>
> > > +# or set your networking parameters here
> > > +#eth0.ipaddr=192.168.1.80
> > > +#eth0.netmask=255.255.255.0
> > > +#eth0.gateway=a.b.c.d
> > > +eth0.serverip=192.168.1.23
> > > +eth0.ethaddr=00:50:c2:8c:e6:0e
> >
> > *never* *ever* add MAC addresses to the default environment.
>
>
> Ok. In my case, the MAC address is actually stored inside a secured at24
> EEPROM buffer. Unfortunately, at24 via I2C does not seem to be available in
> barebox. I reckon I have to port it from the kernel or uboot :).
Or just leave the field blank. In this case a random (local-) MAC
address is generated.
>
> I have included some more debugging and also workarounds for the mx25. This
> is the current debug output, where it clearly indicates that for some
> reason the mx25 esdhc related registers never show a transfer complete for
> a multiblock write:
The kernel has this:
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
| SDHCI_QUIRK_BROKEN_ADMA;
Which means that the kernel won't do multiblock on i.MX25 and i.MX35.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
