Hi Sasha,
thanks for your help!
Am 08.04.2011 15:21, schrieb Sascha Hauer:
Hi Thomas,
On Fri, Apr 08, 2011 at 11:18:36AM +0200, Thomas Mayer wrote:
Hi,
to copy barebox to a mmc I use the command "dd if=barebox.bin
of=/dev/sdb bs=512 seek=2 skip=2&& sync". So I don't touch the
first 0x400 bytes with contains the partition table and everything
is fine.
But I want to write a little script to update barebox itself via
tftp. So I create a partition "/dev/self0" (0x00000 to 0x40000) and
update barebox with "tftp barebox.bin /dev/self0". The problem is
that barebox write the first 0x400 bytes too and overwrite the
partition table .
Is there any way to "seek" and "skip" with barebox?
Not directly. What you can do is this:
tftp barebox.bin
memcpy -s barebox.bin -d /dev/self0 512 0
It's working, but I have to use "1024" instead of "512". Also I have to
change my partition init from
"devfs_add_partition("disk0", 0x000000, 0x040000, PARTITION_FIXED,
"self0");"
to
devfs_add_partition("disk0", 0x000400, 0x040000, PARTITION_FIXED, "self0");
Regards,
Thomas
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
