Hi,
to copy barebox to a mmc I use the command "dd if=barebox.bin
of=/dev/sdb bs=512 seek=2 skip=2 && sync". So I don't touch the first
0x400 bytes with contains the partition table and everything is fine.
But I want to write a little script to update barebox itself via tftp.
So I create a partition "/dev/self0" (0x00000 to 0x40000) and update
barebox with "tftp barebox.bin /dev/self0". The problem is that barebox
write the first 0x400 bytes too and overwrite the partition table .
Is there any way to "seek" and "skip" with barebox?
Regards,
Thomas
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
