Thanks for all the help.
Marko
On Tue, Apr 12, 2011 at 10:09 PM, Baruch Siach <baruch@xxxxxxxxxx> wrote:
Hi Marko,
If you set CONFIG_DEFAULT_ENVIRONMENT and CONFIG_DEFAULT_ENVIRONMENT_PATH in
On Tue, Apr 12, 2011 at 09:42:47PM -0600, Marko Milutinovic wrote:
> One last question though, does this section have to be populated manually?
> Do i have to explicitly load a env.bin file to my device and then copy it to
> the env0 partition? Is there a way to have this loaded onto my main
> bootloader .bin file when it gets compiled?
your .config, then you have a default environment compiled into your Barebox
image. Then, to save this default environment into your flash just run
'saveenv'.
baruch
> On Tue, Apr 12, 2011 at 9:01 PM, Jean-Christophe PLAGNIOL-VILLARD <
> plagnioj@xxxxxxxxxxxx> wrote:
>
> > Hi,
> >
> > Â Â Â Âcould you send your board patch and the log of your console
> > Â Â Â Âso we can help you more
> >
> > Â Â Â Âbtw please do not post in HTML
> >
> > Best Regards,
> > J.
> > On 12:42 Tue 12 Apr   , Marko Milutinovic wrote:
> > > Â ÂHello,
> > > Â Â1. I don't think that I took any steps to save the environment. Not
> > sure
> > > Â Âhow to go about doing that. I have the 'env\bin\init' file under my
> > board
> > > Â Âdirectory. I was under the impressions this would get built in
> > > Â Âautomatically. Additionally in my init.c file for my board I have the
> > > Â Âfollowing lines:
> > > Â Âdevfs_add_partition("nor0", 0x01000000, 0x10000, PARTITION_FIXED,
> > > Â Â"self_raw");
> > > Â Âdevfs_add_partition("nor0", 0x01010000, 0x1000, PARTITION_FIXED,
> > "env0");
> > > Â Â2. When my board boots i get the following output lines
> > > Â ÂMalloc space: .(rest of text ...)
> > > Â ÂStack space: (rest of text ...)
> > > Â ÂOpen /dev/env0 error2
> > > Â Ârunning /env/bin/init...
> > > Â Ânot found
> > > Â Âbarebox:
> > > Â ÂThanks
> > > Â ÂMarko
> > >
> > > Â ÂOn Mon, Apr 11, 2011 at 10:25 PM, Baruch Siach <baruch@xxxxxxxxxx>
> > wrote:
> > >
> > > Â Â ÂHi Marko,
> > > Â Â ÂOn Mon, Apr 11, 2011 at 09:18:53PM -0600, Marko Milutinovic wrote:
> > > Â Â Â> I have barebox working almost fully on my board, except I can't
> > get
> > > Â Â Âthe
> > > Â Â Â> environment to load ... I have an env0 partition allocated and
> > under
> > > Â Â Âmy
> > > Â Â Â> board I have the /env/bin/init file. Anyone have any tips as to
> > what I
> > > Â Â Âam
> > > Â Â Â> missing or can they point me to another resource?
> > >
> > > Â Â ÂMore info is needed:
> > >
> > > Â Â Â1. What did you do to save the environment?
> > >
> > > Â Â Â2. What is your indication that the environment doesn't "load"?
> > >
> > > Â Â Âbaruch
> > > Â Â Â--
--
                          ~. .~  Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
 - baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il -
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
