From: Juergen Beisert <juergen@xxxxxxxxxxxxxx>
---
arch/arm/boards/mini2440/mini2440.c | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boards/mini2440/mini2440.c b/arch/arm/boards/mini2440/mini2440.c
index 30dff07..b30a9e2 100644
--- a/arch/arm/boards/mini2440/mini2440.c
+++ b/arch/arm/boards/mini2440/mini2440.c
@@ -33,12 +33,14 @@
#include <partition.h>
#include <dm9000.h>
#include <nand.h>
+#include <mci.h>
#include <asm/armlinux.h>
#include <asm/io.h>
#include <mach/gpio.h>
#include <mach/s3c24x0-iomap.h>
#include <mach/s3c24x0-nand.h>
#include <mach/s3c24xx-generic.h>
+#include <mach/mci.h>
static struct memory_platform_data ram_pdata = {
.name = "ram0",
@@ -83,6 +85,19 @@ static struct device_d dm9000_dev = {
.platform_data = &dm9000_data,
};
+static struct s3c_mci_platform_data mci_data = {
+ .caps = MMC_MODE_4BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz,
+ .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_detect = 232, /* GPG8_GPIO */
+ .detect_invert = 0,
+};
+
+static struct device_d mci_dev = {
+ .name = "s3c_mci",
+ .map_base = S3C2410_SDI_BASE,
+ .platform_data = &mci_data,
+};
+
static const unsigned pin_usage[] = {
/* address bus, used by NOR, SDRAM */
GPA1_ADDR16,
@@ -252,6 +267,7 @@ static int mini2440_devices_init(void)
devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw");
dev_add_bb_dev("env_raw", NULL);
#endif
+ register_device(&mci_dev);
armlinux_add_dram(&sdram_dev);
armlinux_set_bootparams((void *)sdram_dev.map_base + 0x100);
armlinux_set_architecture(MACH_TYPE_MINI2440);
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
