On Fri, Jan 14, 2011 at 04:25:38PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 14:26 Fri 14 Jan , Sascha Hauer wrote:
> > Hi Nataraj,
> >
> > On Fri, Jan 14, 2011 at 12:01:25PM +0000, Nataraj S Narayan wrote:
> > > Hi
> > >
> > > How I come I don't have /dev/env0? I am on at91sam9263ek.
> > >
> > > 9263-EK:/ saveenv
> > > saving environment
> > > could not open /dev/env0: Read-only file system
> > >
> > > 9263-EK:/ ls -l /dev/env0
> > > ls: /dev/env0: No such file or directory
> > >
> > > 9263-EK:/ ls -l /dev/
> > > cr-------- 4294967295 zero
> > > crw------- 3785 defaultenv
> > > crw------- 4294967295 mem
> > > crw------- 67108864 ram0
> > > crw------- 268435456 nand0
> > > cr-------- 8388608 nand_oob0
> > > crw------- 32 phy0
> > > crw------- 3851423744 nor-352321538
> > ^^^^^^^^^^
> >
> > This should normally be nor0. The name comes from
> > info->cdev.name = asprintf("nor%d", dev->id);
> > in cfi_probe. dev->id is normally initialized to -1 in
> > arch/arm/boards/at91sam9263ek/init.c, then changed to 0 in
> > register_device:
> >
> > if (new_device->id < 0) {
> > new_device->id = get_free_deviceid(new_device->name);
> > }
> > ...
> >
> > I have no idea why this does not work in your case, so it's maybe best
> > to add some printfs in the path I just described to see where dev->id is
> > actually changed to such a bogus value.
> >
> > Note that on the at91sam9263ek the environment partition is added as
> > follows:
> >
> > #if defined(CONFIG_DRIVER_CFI) || defined(CONFIG_DRIVER_CFI_OLD)
> > devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self");
> > devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0");
> > #elif defined(CONFIG_NAND_ATMEL)
> > devfs_add_partition("nand0", 0x00000, 0x80000, PARTITION_FIXED, "self_raw");
> > dev_add_bb_dev("self_raw", "self0");
> > devfs_add_partition("nand0", 0x40000, 0x40000, PARTITION_FIXED, "env_raw");
> > dev_add_bb_dev("env_raw", "env0");
> > #endif
> >
> > This means that when both nand and nor flash is compiled in the
> > environment which be in nor flash. On i.MX we have a way to figure out
> > if barebox is started from nor or from nand and locate the environment
> > in the same device as barebox is started from. I don't know if that's
> > possible on the Atmel processors though.
> unfortunatly no
Maybe we should add a kconfig option for this. The current behaviour
seems rather random.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
