There is no really need for restricted variable types for the parameters.
Replace them by standard C types with the same behaviour.
Signed-off-by: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
---
arch/arm/mach-stm/iomux-imx.c | 13 +++++++------
1 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-stm/iomux-imx.c b/arch/arm/mach-stm/iomux-imx.c
index 2c34d01..2ebe058 100644
--- a/arch/arm/mach-stm/iomux-imx.c
+++ b/arch/arm/mach-stm/iomux-imx.c
@@ -46,31 +46,31 @@
#define MAX_GPIO_NO 159
#endif
-static uint32_t calc_mux_reg(uint32_t no)
+static unsigned calc_mux_reg(unsigned no)
{
/* each register controls 16 pads */
return ((no >> 4) << 4) + HW_PINCTRL_MUXSEL0;
}
-static uint32_t calc_strength_reg(uint32_t no)
+static unsigned calc_strength_reg(unsigned no)
{
/* each register controls 8 pads */
return ((no >> 3) << 4) + HW_PINCTRL_DRIVE0;
}
-static uint32_t calc_pullup_reg(uint32_t no)
+static unsigned calc_pullup_reg(unsigned no)
{
/* each register controls 32 pads */
return ((no >> 5) << 4) + HW_PINCTRL_PULL0;
}
-static uint32_t calc_output_enable_reg(uint32_t no)
+static unsigned calc_output_enable_reg(unsigned no)
{
/* each register controls 32 pads */
return ((no >> 5) << 4) + HW_PINCTRL_DOE0;
}
-static uint32_t calc_output_reg(uint32_t no)
+static unsigned calc_output_reg(unsigned no)
{
/* each register controls 32 pads */
return ((no >> 5) << 4) + HW_PINCTRL_DOUT0;
@@ -81,7 +81,8 @@ static uint32_t calc_output_reg(uint32_t no)
*/
void imx_gpio_mode(unsigned m)
{
- uint32_t reg_offset, gpio_pin, reg;
+ uint32_t reg;
+ unsigned gpio_pin, reg_offset;
gpio_pin = GET_GPIO_NO(m);
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
