With the change to Hz as the main clock unit on the STM architecture the Chumby must also use this unit. Signed-off-by: Juergen Beisert <jbe@xxxxxxxxxxxxxx> --- arch/arm/boards/chumby_falconwing/falconwing.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c index e0706f8..10fbba8 100644 --- a/arch/arm/boards/chumby_falconwing/falconwing.c +++ b/arch/arm/boards/chumby_falconwing/falconwing.c @@ -266,9 +266,9 @@ static int falconwing_devices_init(void) imx_gpio_mode(pad_setup[i]); register_device(&sdram_dev); - imx_set_ioclk(480U * 1000U); /* enable IOCLK to run at the PLL frequency */ + imx_set_ioclk(480000000); /* enable IOCLK to run at the PLL frequency */ /* run the SSP unit clock at 100,000 kHz */ - imx_set_sspclk(0, 100U * 1000U, 1); + imx_set_sspclk(0, 100000000, 1); register_device(&mci_dev); armlinux_add_dram(&sdram_dev); -- 1.7.2.3 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
