Hi all, I'm using Barebox v2010.12.0 (at91sam9260ek_defconfig + loadb + loady) compiled with codesourcery 2010.q1 on the board Atmel AT91SAM9260-EK, the loadb command it's woking fine, but the loady command fails every time, with ckermit and minicom (Ubuntu 10.10): kermit log:" Retry 0: NAK on sector ... Retry 0: NAK on sector Retry 0: Retry Count Exceeded Transfer incomplete ************************* SEND-class command failed. Packets sent: 166 Retransmissions: 0 Timeouts: 0 Damaged packets: 0 " The loadb/loady command of U-Boot v2010.09 on the same AT91SAM9260-EK is working fine. HW/SW Configuration: PC: Ubuntu 10.10 + ckermit (211-14) + minicom (2.4-2ubuntu1) .kermrc: set line /dev/ttyS0 set speed 115200 set carrier-watch off set handshake none set flow-control none robust set file type bin set file name lit set rec pack 1000 set send pack 1000 set window 5 minicom config: Bps/Par/Bits : 115200 8N1 Hardware Flow Control : No Software Flow Control : No Thanks in advance for any help Fabio Porcedda Software Devoloper - R&D Cagliari Telit Communications S.p.A. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
