There is no really need for restricted variable types for the parameters.
Replace them by standard C types with the same behaviour. Only imx_gpio_mode()
need it, to ensure GPIO's bit settings.
Signed-off-by: Juergen Beisert <jbe@xxxxxxxxxxxxxx>
---
arch/arm/mach-stm/iomux-imx23.c | 21 ++++++++++++++-------
1 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-stm/iomux-imx23.c b/arch/arm/mach-stm/iomux-imx23.c
index b0f4046..b50aac3 100644
--- a/arch/arm/mach-stm/iomux-imx23.c
+++ b/arch/arm/mach-stm/iomux-imx23.c
@@ -31,42 +31,49 @@
#define HW_PINCTRL_DIN0 0x600
#define HW_PINCTRL_DOE0 0x700
-static uint32_t calc_mux_reg(uint32_t no)
+static unsigned calc_mux_reg(unsigned no)
{
/* each register controls 16 pads */
return ((no >> 4) << 4) + HW_PINCTRL_MUXSEL0;
}
-static uint32_t calc_strength_reg(uint32_t no)
+static unsigned calc_strength_reg(unsigned no)
{
/* each register controls 8 pads */
return ((no >> 3) << 4) + HW_PINCTRL_DRIVE0;
}
-static uint32_t calc_pullup_reg(uint32_t no)
+static unsigned calc_pullup_reg(unsigned no)
{
/* each register controls 32 pads */
return ((no >> 5) << 4) + HW_PINCTRL_PULL0;
}
-static uint32_t calc_output_enable_reg(uint32_t no)
+static unsigned calc_output_enable_reg(unsigned no)
{
/* each register controls 32 pads */
return ((no >> 5) << 4) + HW_PINCTRL_DOE0;
}
-static uint32_t calc_output_reg(uint32_t no)
+static unsigned calc_output_reg(unsigned no)
{
/* each register controls 32 pads */
return ((no >> 5) << 4) + HW_PINCTRL_DOUT0;
}
+static unsigned calc_input_reg(unsigned no)
+{
+ /* each register controls 32 pads */
+ return ((no >> 5) << 4) + HW_PINCTRL_DIN0;
+}
+
/**
* @param[in] m One of the defines from iomux-mx23.h to configure *one* pin
*/
-void imx_gpio_mode(unsigned m)
+void imx_gpio_mode(uint32_t m)
{
- uint32_t reg_offset, gpio_pin, reg;
+ uint32_t reg;
+ unsigned gpio_pin, reg_offset;
gpio_pin = GET_GPIO_NO(m);
--
1.7.2.3
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
