Re: [Intel-gfx] [PATCH 1/3] drm/i915/tgl+: Add locking around DKL PHY register accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 19 Oct 2022, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> On Wed, Oct 19, 2022 at 12:19:49PM +0300, Ville Syrjälä wrote:
>> On Wed, Oct 19, 2022 at 12:00:02PM +0300, Jani Nikula wrote:
>> > On Tue, 18 Oct 2022, Imre Deak <imre.deak@xxxxxxxxx> wrote:
>> > > Accessing the TypeC DKL PHY registers during modeset-commit,
>> > > -verification, DP link-retraining and AUX power well toggling is racy
>> > > due to these code paths being concurrent and the PHY register bank
>> > > selection register (HIP_INDEX_REG) being shared between PHY instances
>> > > (aka TC ports) and the bank selection being not atomic wrt. the actual
>> > > PHY register access.
>> > >
>> > > Add the required locking around each PHY register bank selection->
>> > > register access sequence.
>> > 
>> > I honestly think the abstraction here is at a too low level.
>> > 
>> > Too many places are doing DKL PHY register access to begin with. IMO the
>> > solution should be to abstract DKL PHY better, not to provide low level
>> > DKL PHY register accessors.
>> > 
>> > Indeed, this level of granularity leads to a lot of unnecessary
>> > lock/unlock that could have a longer span otherwise, and the interface
>> > does not lend itself for that.
>> 
>> It's no worse than uncore.lock. No one cares about that in
>> these codepaths either.
>> 
>> > Also requires separate bank selection for
>> > every write, nearly doubling the MMIO writes.
>> 
>> Drop in the ocean. This is all slow modeset stuff anyway.
>> 
>> IMO separate reg accessors is the correct way to handle indexed
>> registers unless you have some very specific performance concerns
>> to deal with.

Fair enough.

> Now, whether those accessors need to be visible everywere is another
> matter. It should certainly be possible to suck all dkl phy stuff
> into one file and keep the accessors static. But currently eveything
> is grouped by function (PLLs in one file, vswing stuff in another,
> etc.). We'd have to flip that around so that all the sub functions
> of of each IP block is in the same file. Is that a better apporach?
> Not sure.

I'm often interested in the precedent a change makes. What's the
direction we want to go to?

So here, we're saying the DKL PHY registers are special, and need to be
accessed via dedicated register accessors. To enforce this, we create
strong typing for DKL PHY registers. We go out of our way to make it
safe to access DKL PHY registers anywhere in the driver.

Do we want to add more and more register types in the future? And
duplicate the accessors for each? Oops, looks like we're already on our
way [1].

My argument is that maybe access to such a hardware block should instead
be limited to a module (.c file) that abstracts the details. Abstract
hardware blocks and function, not registers. How many files need big
changes to add a new PHY?


BR,
Jani.



[1] https://lore.kernel.org/r/20221014230239.1023689-13-matthew.d.roper@xxxxxxxxx



-- 
Jani Nikula, Intel Open Source Graphics Center




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux