This is a note to let you know that I've just added the patch titled
usb: hub: Do not attempt to autosuspend disconnected devices
to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-hub-do-not-attempt-to-autosuspend-disconnected-devices.patch
and it can be found in the queue-4.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From f5cccf49428447dfbc9edb7a04bb8fc316269781 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@xxxxxxxxxxxx>
Date: Mon, 20 Mar 2017 14:30:50 -0700
Subject: usb: hub: Do not attempt to autosuspend disconnected devices
From: Guenter Roeck <linux@xxxxxxxxxxxx>
commit f5cccf49428447dfbc9edb7a04bb8fc316269781 upstream.
While running a bind/unbind stress test with the dwc3 usb driver on rk3399,
the following crash was observed.
Unable to handle kernel NULL pointer dereference at virtual address 00000218
pgd = ffffffc00165f000
[00000218] *pgd=000000000174f003, *pud=000000000174f003,
*pmd=0000000001750003, *pte=00e8000001751713
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac
ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm
xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth
ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev
snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async
ppp_generic slhc tun
CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507
Hardware name: Google Kevin (DT)
Workqueue: pm pm_runtime_work
task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000
PC is at autosuspend_check+0x74/0x174
LR is at autosuspend_check+0x70/0x174
...
Call trace:
[<ffffffc00080dcc0>] autosuspend_check+0x74/0x174
[<ffffffc000810500>] usb_runtime_idle+0x20/0x40
[<ffffffc000785ae0>] __rpm_callback+0x48/0x7c
[<ffffffc000786af0>] rpm_idle+0x1e8/0x498
[<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc
[<ffffffc000249bb8>] process_one_work+0x390/0x6b8
[<ffffffc00024abcc>] worker_thread+0x480/0x610
[<ffffffc000251a80>] kthread+0x164/0x178
[<ffffffc0002045d0>] ret_from_fork+0x10/0x40
Source:
(gdb) l *0xffffffc00080dcc0
0xffffffc00080dcc0 is in autosuspend_check
(drivers/usb/core/driver.c:1778).
1773 /* We don't need to check interfaces that are
1774 * disabled for runtime PM. Either they are unbound
1775 * or else their drivers don't support autosuspend
1776 * and so they are permanently active.
1777 */
1778 if (intf->dev.power.disable_depth)
1779 continue;
1780 if (atomic_read(&intf->dev.power.usage_count) > 0)
1781 return -EBUSY;
1782 w |= intf->needs_remote_wakeup;
Code analysis shows that intf is set to NULL in usb_disable_device() prior
to setting actconfig to NULL. At the same time, usb_runtime_idle() does not
lock the usb device, and neither does any of the functions in the
traceback. This means that there is no protection against a race condition
where usb_disable_device() is removing dev->actconfig->interface[] pointers
while those are being accessed from autosuspend_check().
To solve the problem, synchronize and validate device state between
autosuspend_check() and usb_disconnect().
Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/core/driver.c | 3 +++
drivers/usb/core/hub.c | 6 ++++++
2 files changed, 9 insertions(+)
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1781,6 +1781,9 @@ static int autosuspend_check(struct usb_
int w, i;
struct usb_interface *intf;
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return -ENODEV;
+
/* Fail if autosuspend is disabled, or any interfaces are in use, or
* any interface drivers require remote wakeup but it isn't available.
*/
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2087,6 +2087,12 @@ void usb_disconnect(struct usb_device **
dev_info(&udev->dev, "USB disconnect, device number %d\n",
udev->devnum);
+ /*
+ * Ensure that the pm runtime code knows that the USB device
+ * is in the process of being disconnected.
+ */
+ pm_runtime_barrier(&udev->dev);
+
usb_lock_device(udev);
hub_disconnect_children(udev);
Patches currently in stable-queue which might be from linux@xxxxxxxxxxxx are
queue-4.11/usb-hub-do-not-attempt-to-autosuspend-disconnected-devices.patch
queue-4.11/usb-hub-fix-error-loop-seen-after-hub-communication-errors.patch