This is a note to let you know that I've just added the patch titled
usb: host: xhci: print correct command ring address
to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-host-xhci-print-correct-command-ring-address.patch
and it can be found in the queue-4.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 6fc091fb0459ade939a795bfdcaf645385b951d4 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@xxxxxxx>
Date: Wed, 19 Apr 2017 16:55:52 +0300
Subject: usb: host: xhci: print correct command ring address
From: Peter Chen <peter.chen@xxxxxxx>
commit 6fc091fb0459ade939a795bfdcaf645385b951d4 upstream.
Print correct command ring address using 'val_64'.
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-mem.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2491,7 +2491,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "// Setting command ring address to 0x%x", val);
+ "// Setting command ring address to 0x%016llx", val_64);
xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
Patches currently in stable-queue which might be from peter.chen@xxxxxxx are
queue-4.11/usb-host-xhci-print-correct-command-ring-address.patch