We finally uninstall squid for windows 2.7 and install 4.14..
we have no time to reedit squid.conf and i tried just to overwrite 4.14 squid.conf with 2.7 (it worked with those settings. It had minor bugs, mentioned in my first message here but it worked. squid 4.14 will not work with this squid.config file. all clients receive the message "refused to connect")
my question is how to fix that without reedit whole 4.14 squid.conf?
Has the syntax of the basic commands changed, perhaps the order of the commands that initialize the proxy?
Basically I need a setting that no one can connect to the proxy except the local network inside (192.168.0.1 - 192.168.0.255) and proxy is their gateway. Then the internet bandwidth per client and the number of connections per client to be limited, the dns servers to be configured and the listening ports (3128 as default and 808 as aditional one).
any idea or help?
thanks in advance
On Sat, Aug 28, 2021 at 10:15 AM Momir Milekic <momir@xxxxxxxxxxxxxxxxxx> wrote:
ok, then i will install v4.14 and try again. After that i will ask for help again.for now, one question more:can i use 2.x config for 4.x without any additional fixes?On Sat, Aug 28, 2021 at 7:22 AM Amos Jeffries <squid3@xxxxxxxxxxxxx> wrote:On 28/08/21 12:12 pm, Momir Milekic wrote:
> Hi,
> Until recently I used squid proxy 2.72 32bit on windows xp machine. We
> finally switched to 64-bit windows10. I copied the old squid proxy to
> windows10 with saved settings (just for test, we were short with time
> for new install). It basically works but there are some problems.
> I wanted to install newer squid proxy version for windows even earlier,
> but the lack of support for windowsxp prevented me.
> In the meantime, i found the v4 version of the squid proxy for windows
> 10. It taked my attention.
>
> I learned to make the most important settings in the config file, but I
> still don't know a lot.
> I have some questions:
> 1) how do I configure forbidden access to sites (facebook, youtube) for
> certain ip addresses from the LAN network? a couple of simple examples
> would help?
see <https://wiki.squid-cache.org/SquidFaq/SquidAcl>
> 2) proxy functions work nicely but sometimes the squid proxy "locks up"
> and there is no data flow for 2-3 minutes. It usually helps to wait or
> restart the service. How to prevent this? The internet link is good,
> probably a problem with hidden bugs in the squid proxy or wrong settings
> (how to increase stability)?
This being Squid-2 it could be quite a lot of things that have long ago
been solved and forgotten about. First thing to do is try an upgrade.
> 3) number of simultaneous connections per client and globally, How to
> set up win10 64bit, specifically for squid proxy service? If i need to
> configure the OS as well, ask me how.
Windows APIs used by Squid-2 have a hard limit that cannot be changed.
> 4) how to turn off caching. The idea is to just redirect http traffic
> and always ask/force latest version of site online? No need to make a
> local copy/cache, just raw proxy between lan and ether/internet.
>
In Squid-2:
cache deny all
cache_mem 0
cache_dir /dev/null parent 0
In modern Squid just remove any cache_dir you have.
> note: all of the above issues and issues are related to version 2.72. If
> v4.14 64-bit version that I downloaded from diladele site yesterday
> works better and not have problems, then great. In any case, a couple of
> examples for squid.conf would help me, I would be very grateful.
>
Squid-2 is HTTP/1.0 software which is 5+ years obsolete now.
Go with the Diladele Squid-4, it is modern HTTP/1.1 software and most of
the help you will be able to get relies on features only found in the
Squid-3+ releases.
Amos
_______________________________________________
squid-users mailing list
squid-users@xxxxxxxxxxxxxxxxxxxxx
http://lists.squid-cache.org/listinfo/squid-users
_______________________________________________ squid-users mailing list squid-users@xxxxxxxxxxxxxxxxxxxxx http://lists.squid-cache.org/listinfo/squid-users
