Maham u can also use these ports for other mobil services in pakistan iptables -A FORWARD -i eth0 -p tcp --dport 50005 -j ACCEPT# warid telecome SMS iptables -A FORWARD -i eth0 -p tcp --dport 51215 -j ACCEPT# mobilink SMS iptables -A FORWARD -i eth0 -p tcp --dport 5002 -j ACCEPT# ufone SMS iptables -A FORWARD -i eth0 -p tcp --dport 5000 -j ACCEPT # tango insta SMS and Mr Asim Hafeez `1st off all tell us wich kind of downlink service u are using if u are using proxy based downlink then use cache_peer let see u are using opensky then its cache_peer would be link this cache_peer 193.251.135.100 parent 8080 0 no-query acl all src 0.0.0.0/.0.0.0.0 never_direct allow all # 193.251.135.100 is opensky c3 transponders IP On 6/13/05, Maham Nasim <maham.nasim@xxxxxxxxx> wrote: > Hi Arfan > i was having same problem i resolved that using > iptables eth0 is my LAN interface eth1 is my bandwidth .give it a try > > regards > Maham > > > iptables -A FORWARD -i eth0 -p tcp --dport 51215 -j ACCEPT > > iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE > > > On 6/12/05, Arfan Ahmad Rana <ahmeda@xxxxxxxxxxxxxxx> wrote: > > Dear Bilal > > I have Linux box as gateway running squid on it, problem is that I can't > > send SMS from any machine from network. Some body told me that I should open > > SMS port from the Linux machine .can you please let me know that > > procedure..... Either I should make change in squid or some thing > > different > > > > > > Regards > > Arfan > > > > -----Original Message----- > > From: Muhammad Bilal Ahmad [mailto:mbilal@xxxxxxxxxxxxxxxx] > > Sent: Sunday, June 12, 2005 1:06 PM > > To: asim hafeez; squid-users@xxxxxxxxxxxxxxx > > Subject: Re: [squid-users] how to > > > > my dear > > > > the squid proxy can work perfectly in this scenario > > with the dvb u would be given a range of ips. usually 6 ips are given by ur > > satellite provider. ur proxy and ur dvb should be of the same network(the > > ips given to by ur satellite provider) you should give ur router secondry ip > > from the same network. > > > > now u have the following scenario. > > 1 ip assigned to router > > 1 ip assigned to squid proxy machine > > 1 ip assigned to ur dvb. > > > > remember all these 3 ips would be of the pool ur provider has given u. > > > > now assign the ip of router as the gateway of ur proxy. > > > > in the squid.conf u should make the acl and allow only ips which u have > > bought for isp and deny any other ip so that the people should not use ur > > bandwidth. > > > > thats all > > > > any other queries are welcom > > > > Kind Regards > > Muhammad Bilal Ahmad > > Network Eng. > > ICT Department > > WorldCALL Multimedia Pvt Ltd > > 16-S Gulberg II Lahore, Pakistan > > Off: 92 (42) 5877051-55 > > > > > > ----- Original Message ----- > > From: "asim hafeez" <asim.mcp@xxxxxxxxx> > > To: <squid-users@xxxxxxxxxxxxxxx> > > Sent: Sunday, June 12, 2005 4:38 AM > > Subject: [squid-users] how to > > > > > > > Dear > > > > > > I want to configure for donwlink.. (Satellite Dish)the basic purpose > > > of mine is to make squid just as proxy server that'll just work from > > > downlink... and the messenger services like msn and yahoo will be > > > connected through uplink (by ISP) . So i want to know how to configure > > > Squid NT to work as i want to ... Can any one let me know about it > > > Please?? > > > > > > Best Regards > > > Asim Hafeez > > > > > -- Syed Kashif Ali Bukhari Network Associate Asia Net Cell :- +92-345-4244813 , +92-300-4295604 Ph +92-42-111-111-202 Fax +92-42-5840905 MSN:- kbukhari@xxxxxxx ; kashif.bukhari@xxxxxxxxxxx http://asia.net.pk , http://asiatec.biz
