Hi Arfan i was having same problem i resolved that using iptables eth0 is my LAN interface eth1 is my bandwidth .give it a try regards Maham iptables -A FORWARD -i eth0 -p tcp --dport 51215 -j ACCEPT iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE On 6/12/05, Arfan Ahmad Rana <ahmeda@xxxxxxxxxxxxxxx> wrote: > Dear Bilal > I have Linux box as gateway running squid on it, problem is that I can't > send SMS from any machine from network. Some body told me that I should open > SMS port from the Linux machine .can you please let me know that > procedure..... Either I should make change in squid or some thing > different > > > Regards > Arfan > > -----Original Message----- > From: Muhammad Bilal Ahmad [mailto:mbilal@xxxxxxxxxxxxxxxx] > Sent: Sunday, June 12, 2005 1:06 PM > To: asim hafeez; squid-users@xxxxxxxxxxxxxxx > Subject: Re: [squid-users] how to > > my dear > > the squid proxy can work perfectly in this scenario > with the dvb u would be given a range of ips. usually 6 ips are given by ur > satellite provider. ur proxy and ur dvb should be of the same network(the > ips given to by ur satellite provider) you should give ur router secondry ip > from the same network. > > now u have the following scenario. > 1 ip assigned to router > 1 ip assigned to squid proxy machine > 1 ip assigned to ur dvb. > > remember all these 3 ips would be of the pool ur provider has given u. > > now assign the ip of router as the gateway of ur proxy. > > in the squid.conf u should make the acl and allow only ips which u have > bought for isp and deny any other ip so that the people should not use ur > bandwidth. > > thats all > > any other queries are welcom > > Kind Regards > Muhammad Bilal Ahmad > Network Eng. > ICT Department > WorldCALL Multimedia Pvt Ltd > 16-S Gulberg II Lahore, Pakistan > Off: 92 (42) 5877051-55 > > > ----- Original Message ----- > From: "asim hafeez" <asim.mcp@xxxxxxxxx> > To: <squid-users@xxxxxxxxxxxxxxx> > Sent: Sunday, June 12, 2005 4:38 AM > Subject: [squid-users] how to > > > > Dear > > > > I want to configure for donwlink.. (Satellite Dish)the basic purpose > > of mine is to make squid just as proxy server that'll just work from > > downlink... and the messenger services like msn and yahoo will be > > connected through uplink (by ISP) . So i want to know how to configure > > Squid NT to work as i want to ... Can any one let me know about it > > Please?? > > > > Best Regards > > Asim Hafeez > >