On 3/7/07, Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
Gentoo seems to be carrying this patch: http://marc.theaimsgroup.com/?l=linux-sparc&m=110314220200915&w=2 I'm going to try and see if that is indeed what fixes the issue. If so perhaps it should go upstream?
FWIW, this patch got 2.6.17 vanilla booting for us. I hope that helping in tracking things down in the newer kernels. Alex
Thanks, Alex On 3/7/07, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > On 3/7/07, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > > On 3/6/07, David Miller <davem@xxxxxxxxxxxxx> wrote: > > > From: "Alex Deucher" <alexdeucher@xxxxxxxxx> > > > Date: Tue, 6 Mar 2007 19:49:11 -0500 > > > > > > > Had anyone had any success booting Linux on a v880? We've been trying > > > > to get various Debian/Ubuntu/Gentoo images up and running on it for > > > > the last few days, but so far no luck. Both CD-ROM and netboot > > > > produce the same results. We updated the OBP to the lasted version. > > > > We've tried the video=atyfb:off trick but to no avail. All we ever > > > > get is "Booting Linux..." and then nothing else. We tried removing > > > > the video card and keyboard and mouse, no difference. Has anyone had > > > > any success on the v880? Any other things we could try? > > > > > > If you boot with "-p" what further messages do you get? > > > > > > > "boot net:dhcp –p": > > > > Error: Cheetah error trap taken afsr[ ] > > Error: TPC[ ] TNPC[ ] TSTATE[ ] > > Error: M_SYND(0), E_SYND(0), Privileged > > Error: Highest Priority Error() "Unmapped error from system" > > > > Then a bunch of D-cache, I-cache, and E-cache errors. > > > > And finally, > > > > Kernel Panic – not syncing: Irrecoverable deferred error trap > > > > BTW, my co-worker eventually got a gentoo CD working (2006.1 minimal IIRC). > > > > Alex > > > > here's the kernel output from the working gentoo kernel: > > boot cdrom > Boot device: /pci@8,700000/scsi@1/disk@6,0:f File and args: > SILO Version 1.4.13 > \^H > > ---------------------------------------------------- > Welcome to the Gentoo/Linux SPARC64 InstallCD 2006.1 > ---------------------------------------------------- > > boot: > You are running the second stage SILO loader. From here you can boot a > ramdisk or an already-installed Linux partition. > > Several defaults have been defined that will make things easier. > The target "2616" will start a 2.6.16-series kernel. > The target "2617" will start a 2.6.17-series kernel. > > To boot an existing Linux installation from the CDROM, boot with the command > "KERNEL root=/dev/sdaX" where sdaX is the partition where your root > filesystem is. Replace "KERNEL" with the kernel entry of your choice above. > If in doubt you can consult our hardware compatibility list for stability > notes at http://www.gentoo.org/proj/en/base/sparc/sunhw.xml > > For video mode help, type "video" at the boot: prompt. > For help on miscellaneous parameters type "parameters" at the boot: prompt. > Type "config" at the boot: prompt to see the SILO config file used by this CD. > boot: 2617 > Allocated 8 Megs of memory at 0x40000000 for kernel > |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^$ > Loading initial ramdisk (645016 bytes at 0xB0FF800000 phys, 0x40C00000 virt)... > \^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^$ > Remapping the kernel... done. > bootmem_init: Scan pavail, choose_bootmap_pfn: > kern[b0ff000000:b0ff4d6000] avoid[b0ff800000:b0ff89e000] > choose_bootmap_pfn: Using 5000000 [a000000000] > init_bootmem(min[5000000], bootmap[5000000], max[587fd54]) > free_bootmem(pavail:0): base[a000000000] size[100000000] > free_bootmem(pavail:1): base[b000000000] size[feffe000] > free_bootmem(pavail:2): base[b0ff000000] size[a8a000] > free_bootmem(pavail:3): base[b0ffa8e000] size[1a000] > reserve_bootmem(initrd): base[b0ff800000] size[b0ff89d798] > reserve_bootmem(kernel): base[b0ff000000] size[4d5ee8] > reserve_bootmem(bootmap): base[a000000000] size[10ffb0] > memory_present(0, 5000000, 5080000) > memory_present(0, 5800000, 587f7ff) > memory_present(0, 587f800, 587fd45) > memory_present(0, 587fd47, 587fd54) > Booting Linux... > mem_init: Calling free_all_bootmem(). > ^H > ^H ^H ^H ^H ^H $ > PROMLIB: Root node compatible: > Linux version 2.6.17-gentoo-r5 (root@bender) (gcc version 3.4.6 > (Gentoo Linux 3.4.6)) #1 SMP Fri Aug 25 09:10:34 UTC 2006 > ARCH: SUN4U > Ethernet address: 00:03:ba:69:0e:32 > Built 1 zonelists > Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs > loop=/image.squashfs cdroot > PID hash table entries: 4096 (order: 12, 32768 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes) > Memory: 8306040k available (2536k kernel code, 1584k data, 176k init) > [fffff80000000000,000000b0ffaa8000] > Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40008) > Mount-cache hash table entries: 512 > CPU[3]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] > E[sz(8388608):line_sz(512)] > Using max_cache_size of 8MB > Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40001) > CPU[0]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] > E[sz(8388608):line_sz(512)] > CPU 0: synchronized TICK with master CPU (last diff -1 cycles,maxerr 11 cycles) > Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40001) > CPU[1]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] > E[sz(8388608):line_sz(512)] > CPU 1: synchronized TICK with master CPU (last diff 0 cycles,maxerr 10 cycles) > Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40001) > CPU[2]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] > E[sz(8388608):line_sz(512)] > CPU 2: synchronized TICK with master CPU (last diff -1 cycles,maxerr 10 cycles) > Brought up 4 CPUs > Total of 4 processors activated (80.00 BogoMIPS). > migration_cost=64942 > checking if image is initramfs... it is > Freeing initrd memory: 629k freed > NET: Registered protocol family 16 > PCI: Probing for controllers. > SCHIZO0 PBMB: ver[7:0], portid 8, cregs[40004400000] pregs[40004700000] > SCHIZO0 PBMB: PCI CFG[7ffee000000] IO[7ffef000000] MEM[7fe00000000] > SCHIZO0 PBMA: ver[7:0], portid 8, cregs[40004400000] pregs[40004600000] > SCHIZO0 PBMA: PCI CFG[7ffec000000] IO[7ffed000000] MEM[7fd00000000] > SCHIZO1 PBMB: ver[7:0], portid 9, cregs[40004c00000] pregs[40004f00000] > SCHIZO1 PBMB: PCI CFG[7ffea000000] IO[7ffeb000000] MEM[7fc00000000] > SCHIZO1 PBMA: ver[7:0], portid 9, cregs[40004c00000] pregs[40004e00000] > SCHIZO1 PBMA: PCI CFG[7ffe8000000] IO[7ffe9000000] MEM[7fb00000000] > PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[1d] > PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[1f] > PCI1(PBMB): Bus running at 33MHz > PCI1(PBMA): Bus running at 66MHz > PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[1c] > PCI-IRQ: Routing bus[ 0] slot[ 5] to INO[18] > PCI0(PBMB): Bus running at 33MHz > PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[00] > PCI-IRQ: Routing bus[ 0] slot[ 2] to INO[04] > PCI0(PBMA): Bus running at 66MHz > ebus0: [flashprom] [bbc] [power] [i2c -> (fru) (fru) (fru) (fru) (fru) > (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) $ > power: Control reg at 000007fc7e30002e ... not using powerd. > SCSI subsystem initialized > NET: Registered protocol family 2 > IP route cache hash table entries: 262144 (order: 8, 2097152 bytes) > TCP established hash table entries: 524288 (order: 10, 8388608 bytes) > TCP bind hash table entries: 65536 (order: 7, 1048576 bytes) > TCP: Hash tables configured (established 524288 bind 65536) > TCP reno registered > chmc0: US3 memory controller at 0000040000400000 [ACTIVE] > chmc1: US3 memory controller at 0000040000c00000 [ACTIVE] > chmc2: US3 memory controller at 0000040001400000 [ACTIVE] > chmc3: US3 memory controller at 0000040001c00000 [ACTIVE] > Total HugeTLB memory allocated, 0 > squashfs: version 3.0 (2006/03/15) Phillip Lougher > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > Console: switching to mono PROM 80x34 > Real Time Clock Driver v1.12ac > ttyS0 at MMIO 0x7fc7e400000 (irq = 8675776) is a SAB82532 V3.2 > Console: ttyS0 (SAB82532) > ttyS1 at MMIO 0x7fc7e400040 (irq = 8675776) is a SAB82532 V3.2 > mice: PS/2 mouse device common for all mice > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > QLogic Fibre Channel HBA Driver > qla2200 0000:00:02.0: Found an ISP2200, irq 8672768, iobase 0x000007fd00400000 > qla2200 0000:00:02.0: Configuring PCI space... > qla2200 0000:00:02.0: Configure NVRAM parameters... > qla2200 0000:00:02.0: Inconsistent NVRAM detected: checksum=0x0 id=ÿ > version=0xff. > qla2200 0000:00:02.0: Falling back to functioning (yet invalid -- > WWPN) defaults. > qla2200 0000:00:02.0: Verifying loaded RISC code... > qla2200 0000:00:02.0: LIP reset occured (f7ef). > qla2200 0000:00:02.0: Waiting for LIP to complete... > qla2200 0000:00:02.0: LIP occured (f7ef). > qla2200 0000:00:02.0: LOOP UP detected (1 Gbps). > qla2200 0000:00:02.0: Topology - (Loop), Host Loop address 0x7 > scsi0 : qla2xxx > qla2200 0000:00:02.0: > QLogic Fibre Channel HBA Driver: 8.01.04-k-fw > QLogic QLA22xx - > ISP2200: PCI (66 MHz) @ 0000:00:02.0 hdma-, host#=0, fw=2.02.08 TP > sym0: <875> rev 0x4 at pci 0001:00:01.0 irq 8,21c > Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 > Type: Direct-Access ANSI SCSI revision: 04 > Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 > Type: Direct-Access sym0: No NVRAM, ID 7, Fast-20, SE, parity > checking > sym0: SCSI BUS has been reset. > scsi1 : sym-2.2.3 > ANSI SCSI revision: 04 > Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 > Type: Direct-Access ANSI SCSI revision: 04 > Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 > Type: Direct-Access ANSI SCSI revision: 04 > Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 > Type: Direct-Access ANSI SCSI revision: 04 > Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 > Type: Direct-Access ANSI SCSI revision: 04 > Vendor: SUNW Model: SUNWGS INT FCBPL Rev: 922A > Type: Enclosure ANSI SCSI revision: 03 > Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 > Type: Direct-Access ANSI SCSI revision: 03 > Vendor: TOSHIBA Model: DVD-ROM SD-M1711 Rev: 1005 > Type: CD-ROM ANSI SCSI revision: 02 > target1:0:6: Beginning Domain Validation > target1:0:6: asynchronous > target1:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) > target1:0:6: Domain Validation skipping write tests > target1:0:6: Ending Domain Validation > megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006 > SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) > sda: Write Protect is off > SCSI device sda: drive cache: write through > SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) > sda: Write Protect is off > SCSI device sda: drive cache: write through > sda: sda1 sda2 sda3 sda8 > sd 0:0:0:0: Attached scsi disk sda > SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) > sdb: Write Protect is off > SCSI device sdb: drive cache: write through > SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) > sdb: Write Protect is off > SCSI device sdb: drive cache: write through > sdb: sdb1 sdb2 sdb3 sdb7 > sd 0:0:1:0: Attached scsi disk sdb > SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB) > sdc: Write Protect is off > SCSI device sdc: drive cache: write through > SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB) > sdc: Write Protect is off > SCSI device sdc: drive cache: write through > sdc: sdc1 sdc2 sdc3 sdc7 > sd 0:0:2:0: Attached scsi disk sdc > SCSI device sdd: 143374738 512-byte hdwr sectors (73408 MB) > sdd: Write Protect is off > SCSI device sdd: drive cache: write through > SCSI device sdd: 143374738 512-byte hdwr sectors (73408 MB) > sdd: Write Protect is off > SCSI device sdd: drive cache: write through > sdd: sdd1 sdd2 sdd3 sdd7 > sd 0:0:3:0: Attached scsi disk sdd > SCSI device sde: 143374738 512-byte hdwr sectors (73408 MB) > sde: Write Protect is off > SCSI device sde: drive cache: write through > SCSI device sde: 143374738 512-byte hdwr sectors (73408 MB) > sde: Write Protect is off > SCSI device sde: drive cache: write through > sde: sde1 sde2 sde3 sde7 > sd 0:0:4:0: Attached scsi disk sde > SCSI device sdf: 143374738 512-byte hdwr sectors (73408 MB) > sdf: Write Protect is off > SCSI device sdf: drive cache: write through > SCSI device sdf: 143374738 512-byte hdwr sectors (73408 MB) > sdf: Write Protect is off > SCSI device sdf: drive cache: write through > sdf: sdf1 sdf2 sdf3 sdf7 > sd 0:0:5:0: Attached scsi disk sdf > SCSI device sdg: 286739329 512-byte hdwr sectors (146811 MB) > sdg: Write Protect is off > SCSI device sdg: drive cache: write through w/ FUA > SCSI device sdg: 286739329 512-byte hdwr sectors (146811 MB) > sdg: Write Protect is off > SCSI device sdg: drive cache: write through w/ FUA > sdg: sdg1 sdg2 sdg3 sdg7 > sd 0:0:7:0: Attached scsi disk sdg > SCSI device sdh: 286739329 512-byte hdwr sectors (146811 MB) > sdh: Write Protect is off > SCSI device sdh: drive cache: write through w/ FUA > SCSI device sdh: 286739329 512-byte hdwr sectors (146811 MB) > sdh: Write Protect is off > SCSI device sdh: drive cache: write through w/ FUA > sdh: sdh1 sdh2 sdh3 sdh7 > sd 0:0:8:0: Attached scsi disk sdh > SCSI device sdi: 286739329 512-byte hdwr sectors (146811 MB) > sdi: Write Protect is off > SCSI device sdi: drive cache: write through w/ FUA > SCSI device sdi: 286739329 512-byte hdwr sectors (146811 MB) > sdi: Write Protect is off > SCSI device sdi: drive cache: write through w/ FUA > sdi: sdi1 sdi2 sdi3 sdi7 > sd 0:0:9:0: Attached scsi disk sdi > SCSI device sdj: 286739329 512-byte hdwr sectors (146811 MB) > sdj: Write Protect is off > SCSI device sdj: drive cache: write through w/ FUA > SCSI device sdj: 286739329 512-byte hdwr sectors (146811 MB) > sdj: Write Protect is off > SCSI device sdj: drive cache: write through w/ FUA > sdj: sdj1 sdj2 sdj3 sdj7 > sd 0:0:10:0: Attached scsi disk sdj > SCSI device sdk: 286739329 512-byte hdwr sectors (146811 MB) > sdk: Write Protect is off > SCSI device sdk: drive cache: write through w/ FUA > SCSI device sdk: 286739329 512-byte hdwr sectors (146811 MB) > sdk: Write Protect is off > SCSI device sdk: drive cache: write through w/ FUA > sdk: sdk1 sdk2 sdk3 sdk7 > sd 0:0:11:0: Attached scsi disk sdk > SCSI device sdl: 286739329 512-byte hdwr sectors (146811 MB) > sdl: Write Protect is off > SCSI device sdl: drive cache: write through w/ FUA > SCSI device sdl: 286739329 512-byte hdwr sectors (146811 MB) > sdl: Write Protect is off > SCSI device sdl: drive cache: write through w/ FUA > sdl: sdl1 sdl2 sdl3 sdl7 > sd 0:0:12:0: Attached scsi disk sdl > sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.20 > Fusion MPT base driver 3.03.09 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.03.09 > Fusion MPT FC Host driver 3.03.09 > Fusion MPT SAS Host driver 3.03.09 > Fusion MPT misc device (ioctl) driver 3.03.09 > mptctl: Registered with Fusion MPT base driver > mptctl: /dev/mptctl @ (major,minor=10,220) > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17þ>> Loading modules > >> Activating mdev > >> Making tmpfs for /newroot > >> Attempting to mount CD:- /dev/sr0 > >> CD medium found on /dev/sr0 > >> Determining root device... > >> Determining looptype ... > >> Mounting squashfs filesystem > >> Copying read-write image contents to tmpfs > >> No cdupdate.sh script found, skipping... > >> Booting (initramfs)... > INITúW^ÖÍ¥½¹^Á2.86 booting >
- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
