Gentoo seems to be carrying this patch: http://marc.theaimsgroup.com/?l=linux-sparc&m=110314220200915&w=2 I'm going to try and see if that is indeed what fixes the issue. If so perhaps it should go upstream? Thanks, Alex On 3/7/07, Alex Deucher <alexdeucher@xxxxxxxxx> wrote:
On 3/7/07, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > On 3/6/07, David Miller <davem@xxxxxxxxxxxxx> wrote: > > From: "Alex Deucher" <alexdeucher@xxxxxxxxx> > > Date: Tue, 6 Mar 2007 19:49:11 -0500 > > > > > Had anyone had any success booting Linux on a v880? We've been trying > > > to get various Debian/Ubuntu/Gentoo images up and running on it for > > > the last few days, but so far no luck. Both CD-ROM and netboot > > > produce the same results. We updated the OBP to the lasted version. > > > We've tried the video=atyfb:off trick but to no avail. All we ever > > > get is "Booting Linux..." and then nothing else. We tried removing > > > the video card and keyboard and mouse, no difference. Has anyone had > > > any success on the v880? Any other things we could try? > > > > If you boot with "-p" what further messages do you get? > > > > "boot net:dhcp –p": > > Error: Cheetah error trap taken afsr[ ] > Error: TPC[ ] TNPC[ ] TSTATE[ ] > Error: M_SYND(0), E_SYND(0), Privileged > Error: Highest Priority Error() "Unmapped error from system" > > Then a bunch of D-cache, I-cache, and E-cache errors. > > And finally, > > Kernel Panic – not syncing: Irrecoverable deferred error trap > > BTW, my co-worker eventually got a gentoo CD working (2006.1 minimal IIRC). > > Alex > here's the kernel output from the working gentoo kernel: boot cdrom Boot device: /pci@8,700000/scsi@1/disk@6,0:f File and args: SILO Version 1.4.13 \^H ---------------------------------------------------- Welcome to the Gentoo/Linux SPARC64 InstallCD 2006.1 ---------------------------------------------------- boot: You are running the second stage SILO loader. From here you can boot a ramdisk or an already-installed Linux partition. Several defaults have been defined that will make things easier. The target "2616" will start a 2.6.16-series kernel. The target "2617" will start a 2.6.17-series kernel. To boot an existing Linux installation from the CDROM, boot with the command "KERNEL root=/dev/sdaX" where sdaX is the partition where your root filesystem is. Replace "KERNEL" with the kernel entry of your choice above. If in doubt you can consult our hardware compatibility list for stability notes at http://www.gentoo.org/proj/en/base/sparc/sunhw.xml For video mode help, type "video" at the boot: prompt. For help on miscellaneous parameters type "parameters" at the boot: prompt. Type "config" at the boot: prompt to see the SILO config file used by this CD. boot: 2617 Allocated 8 Megs of memory at 0x40000000 for kernel |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^$ Loading initial ramdisk (645016 bytes at 0xB0FF800000 phys, 0x40C00000 virt)... \^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^$ Remapping the kernel... done. bootmem_init: Scan pavail, choose_bootmap_pfn: kern[b0ff000000:b0ff4d6000] avoid[b0ff800000:b0ff89e000] choose_bootmap_pfn: Using 5000000 [a000000000] init_bootmem(min[5000000], bootmap[5000000], max[587fd54]) free_bootmem(pavail:0): base[a000000000] size[100000000] free_bootmem(pavail:1): base[b000000000] size[feffe000] free_bootmem(pavail:2): base[b0ff000000] size[a8a000] free_bootmem(pavail:3): base[b0ffa8e000] size[1a000] reserve_bootmem(initrd): base[b0ff800000] size[b0ff89d798] reserve_bootmem(kernel): base[b0ff000000] size[4d5ee8] reserve_bootmem(bootmap): base[a000000000] size[10ffb0] memory_present(0, 5000000, 5080000) memory_present(0, 5800000, 587f7ff) memory_present(0, 587f800, 587fd45) memory_present(0, 587fd47, 587fd54) Booting Linux... mem_init: Calling free_all_bootmem(). ^H ^H ^H ^H ^H ^H $ PROMLIB: Root node compatible: Linux version 2.6.17-gentoo-r5 (root@bender) (gcc version 3.4.6 (Gentoo Linux 3.4.6)) #1 SMP Fri Aug 25 09:10:34 UTC 2006 ARCH: SUN4U Ethernet address: 00:03:ba:69:0e:32 Built 1 zonelists Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/image.squashfs cdroot PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 10, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 9, 4194304 bytes) Memory: 8306040k available (2536k kernel code, 1584k data, 176k init) [fffff80000000000,000000b0ffaa8000] Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40008) Mount-cache hash table entries: 512 CPU[3]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] E[sz(8388608):line_sz(512)] Using max_cache_size of 8MB Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40001) CPU[0]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] E[sz(8388608):line_sz(512)] CPU 0: synchronized TICK with master CPU (last diff -1 cycles,maxerr 11 cycles) Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40001) CPU[1]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] E[sz(8388608):line_sz(512)] CPU 1: synchronized TICK with master CPU (last diff 0 cycles,maxerr 10 cycles) Calibrating delay using timer specific routine.. 20.00 BogoMIPS (lpj=40001) CPU[2]: Caches D[sz(65536):line_sz(32)] I[sz(32768):line_sz(32)] E[sz(8388608):line_sz(512)] CPU 2: synchronized TICK with master CPU (last diff -1 cycles,maxerr 10 cycles) Brought up 4 CPUs Total of 4 processors activated (80.00 BogoMIPS). migration_cost=64942 checking if image is initramfs... it is Freeing initrd memory: 629k freed NET: Registered protocol family 16 PCI: Probing for controllers. SCHIZO0 PBMB: ver[7:0], portid 8, cregs[40004400000] pregs[40004700000] SCHIZO0 PBMB: PCI CFG[7ffee000000] IO[7ffef000000] MEM[7fe00000000] SCHIZO0 PBMA: ver[7:0], portid 8, cregs[40004400000] pregs[40004600000] SCHIZO0 PBMA: PCI CFG[7ffec000000] IO[7ffed000000] MEM[7fd00000000] SCHIZO1 PBMB: ver[7:0], portid 9, cregs[40004c00000] pregs[40004f00000] SCHIZO1 PBMB: PCI CFG[7ffea000000] IO[7ffeb000000] MEM[7fc00000000] SCHIZO1 PBMA: ver[7:0], portid 9, cregs[40004c00000] pregs[40004e00000] SCHIZO1 PBMA: PCI CFG[7ffe8000000] IO[7ffe9000000] MEM[7fb00000000] PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[1d] PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[1f] PCI1(PBMB): Bus running at 33MHz PCI1(PBMA): Bus running at 66MHz PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[1c] PCI-IRQ: Routing bus[ 0] slot[ 5] to INO[18] PCI0(PBMB): Bus running at 33MHz PCI-IRQ: Routing bus[ 0] slot[ 1] to INO[00] PCI-IRQ: Routing bus[ 0] slot[ 2] to INO[04] PCI0(PBMA): Bus running at 66MHz ebus0: [flashprom] [bbc] [power] [i2c -> (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) (fru) $ power: Control reg at 000007fc7e30002e ... not using powerd. SCSI subsystem initialized NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 8, 2097152 bytes) TCP established hash table entries: 524288 (order: 10, 8388608 bytes) TCP bind hash table entries: 65536 (order: 7, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered chmc0: US3 memory controller at 0000040000400000 [ACTIVE] chmc1: US3 memory controller at 0000040000c00000 [ACTIVE] chmc2: US3 memory controller at 0000040001400000 [ACTIVE] chmc3: US3 memory controller at 0000040001c00000 [ACTIVE] Total HugeTLB memory allocated, 0 squashfs: version 3.0 (2006/03/15) Phillip Lougher Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Console: switching to mono PROM 80x34 Real Time Clock Driver v1.12ac ttyS0 at MMIO 0x7fc7e400000 (irq = 8675776) is a SAB82532 V3.2 Console: ttyS0 (SAB82532) ttyS1 at MMIO 0x7fc7e400040 (irq = 8675776) is a SAB82532 V3.2 mice: PS/2 mouse device common for all mice RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx QLogic Fibre Channel HBA Driver qla2200 0000:00:02.0: Found an ISP2200, irq 8672768, iobase 0x000007fd00400000 qla2200 0000:00:02.0: Configuring PCI space... qla2200 0000:00:02.0: Configure NVRAM parameters... qla2200 0000:00:02.0: Inconsistent NVRAM detected: checksum=0x0 id=ÿ version=0xff. qla2200 0000:00:02.0: Falling back to functioning (yet invalid -- WWPN) defaults. qla2200 0000:00:02.0: Verifying loaded RISC code... qla2200 0000:00:02.0: LIP reset occured (f7ef). qla2200 0000:00:02.0: Waiting for LIP to complete... qla2200 0000:00:02.0: LIP occured (f7ef). qla2200 0000:00:02.0: LOOP UP detected (1 Gbps). qla2200 0000:00:02.0: Topology - (Loop), Host Loop address 0x7 scsi0 : qla2xxx qla2200 0000:00:02.0: QLogic Fibre Channel HBA Driver: 8.01.04-k-fw QLogic QLA22xx - ISP2200: PCI (66 MHz) @ 0000:00:02.0 hdma-, host#=0, fw=2.02.08 TP sym0: <875> rev 0x4 at pci 0001:00:01.0 irq 8,21c Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 Type: Direct-Access ANSI SCSI revision: 04 Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 Type: Direct-Access sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. scsi1 : sym-2.2.3 ANSI SCSI revision: 04 Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 Type: Direct-Access ANSI SCSI revision: 04 Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 Type: Direct-Access ANSI SCSI revision: 04 Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 Type: Direct-Access ANSI SCSI revision: 04 Vendor: FUJITSU Model: MAP3735F SUN72G Rev: 1201 Type: Direct-Access ANSI SCSI revision: 04 Vendor: SUNW Model: SUNWGS INT FCBPL Rev: 922A Type: Enclosure ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST314680FSUN146G Rev: 0307 Type: Direct-Access ANSI SCSI revision: 03 Vendor: TOSHIBA Model: DVD-ROM SD-M1711 Rev: 1005 Type: CD-ROM ANSI SCSI revision: 02 target1:0:6: Beginning Domain Validation target1:0:6: asynchronous target1:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target1:0:6: Domain Validation skipping write tests target1:0:6: Ending Domain Validation megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006 SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) sda: Write Protect is off SCSI device sda: drive cache: write through SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) sda: Write Protect is off SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda8 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through sdb: sdb1 sdb2 sdb3 sdb7 sd 0:0:1:0: Attached scsi disk sdb SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write through SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write through sdc: sdc1 sdc2 sdc3 sdc7 sd 0:0:2:0: Attached scsi disk sdc SCSI device sdd: 143374738 512-byte hdwr sectors (73408 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through SCSI device sdd: 143374738 512-byte hdwr sectors (73408 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through sdd: sdd1 sdd2 sdd3 sdd7 sd 0:0:3:0: Attached scsi disk sdd SCSI device sde: 143374738 512-byte hdwr sectors (73408 MB) sde: Write Protect is off SCSI device sde: drive cache: write through SCSI device sde: 143374738 512-byte hdwr sectors (73408 MB) sde: Write Protect is off SCSI device sde: drive cache: write through sde: sde1 sde2 sde3 sde7 sd 0:0:4:0: Attached scsi disk sde SCSI device sdf: 143374738 512-byte hdwr sectors (73408 MB) sdf: Write Protect is off SCSI device sdf: drive cache: write through SCSI device sdf: 143374738 512-byte hdwr sectors (73408 MB) sdf: Write Protect is off SCSI device sdf: drive cache: write through sdf: sdf1 sdf2 sdf3 sdf7 sd 0:0:5:0: Attached scsi disk sdf SCSI device sdg: 286739329 512-byte hdwr sectors (146811 MB) sdg: Write Protect is off SCSI device sdg: drive cache: write through w/ FUA SCSI device sdg: 286739329 512-byte hdwr sectors (146811 MB) sdg: Write Protect is off SCSI device sdg: drive cache: write through w/ FUA sdg: sdg1 sdg2 sdg3 sdg7 sd 0:0:7:0: Attached scsi disk sdg SCSI device sdh: 286739329 512-byte hdwr sectors (146811 MB) sdh: Write Protect is off SCSI device sdh: drive cache: write through w/ FUA SCSI device sdh: 286739329 512-byte hdwr sectors (146811 MB) sdh: Write Protect is off SCSI device sdh: drive cache: write through w/ FUA sdh: sdh1 sdh2 sdh3 sdh7 sd 0:0:8:0: Attached scsi disk sdh SCSI device sdi: 286739329 512-byte hdwr sectors (146811 MB) sdi: Write Protect is off SCSI device sdi: drive cache: write through w/ FUA SCSI device sdi: 286739329 512-byte hdwr sectors (146811 MB) sdi: Write Protect is off SCSI device sdi: drive cache: write through w/ FUA sdi: sdi1 sdi2 sdi3 sdi7 sd 0:0:9:0: Attached scsi disk sdi SCSI device sdj: 286739329 512-byte hdwr sectors (146811 MB) sdj: Write Protect is off SCSI device sdj: drive cache: write through w/ FUA SCSI device sdj: 286739329 512-byte hdwr sectors (146811 MB) sdj: Write Protect is off SCSI device sdj: drive cache: write through w/ FUA sdj: sdj1 sdj2 sdj3 sdj7 sd 0:0:10:0: Attached scsi disk sdj SCSI device sdk: 286739329 512-byte hdwr sectors (146811 MB) sdk: Write Protect is off SCSI device sdk: drive cache: write through w/ FUA SCSI device sdk: 286739329 512-byte hdwr sectors (146811 MB) sdk: Write Protect is off SCSI device sdk: drive cache: write through w/ FUA sdk: sdk1 sdk2 sdk3 sdk7 sd 0:0:11:0: Attached scsi disk sdk SCSI device sdl: 286739329 512-byte hdwr sectors (146811 MB) sdl: Write Protect is off SCSI device sdl: drive cache: write through w/ FUA SCSI device sdl: 286739329 512-byte hdwr sectors (146811 MB) sdl: Write Protect is off SCSI device sdl: drive cache: write through w/ FUA sdl: sdl1 sdl2 sdl3 sdl7 sd 0:0:12:0: Attached scsi disk sdl sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Fusion MPT base driver 3.03.09 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.09 Fusion MPT FC Host driver 3.03.09 Fusion MPT SAS Host driver 3.03.09 Fusion MPT misc device (ioctl) driver 3.03.09 mptctl: Registered with Fusion MPT base driver mptctl: /dev/mptctl @ (major,minor=10,220) TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17þ>> Loading modules >> Activating mdev >> Making tmpfs for /newroot >> Attempting to mount CD:- /dev/sr0 >> CD medium found on /dev/sr0 >> Determining root device... >> Determining looptype ... >> Mounting squashfs filesystem >> Copying read-write image contents to tmpfs >> No cdupdate.sh script found, skipping... >> Booting (initramfs)... INITúW^ÖÍ¥½¹^Á2.86 booting
- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
