[Sound] Re: Sound-list digest, Vol 1 #511 - 2 msgs

[vivek <vivek@xxxxxxxxxxxxxxx>]

Hi Bill,
        I tried a work around. I removed my pci 64 card from the 
mother board.
I downloaded sndconfig and tried a manual configuration.
the device was detected to be 
VIA technologies, VT8233 AC97 Audio Controller,
which is correct, 'cause it works well on my windows installation.

But as the driver installation continued, sndconfig gave me this error,

 The following error occurred running the modprobe program:       │
                            │                                                                 
│
                            │ /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o:  
│
                            │ init_module: No such device                                     
│
                            │ /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o:  
│
                            │ insmod                                                          
│
                            │ /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o   
│
                            │ failed                                                          
│
                            │ /lib/modules/2.4.18-14/kernel/drivers/sound/via82cxxx_audio.o:  
│
                            │ insmod sound-slot-0 failed

The same error was detected when I manually ran modprobe.

Let me know if you have any clue to this.
guess u cud try configuring ur sound card with  sndconfig, or select the
driver
manually from the list or try running  ~# modprobe emu10k1

regards,
Vivek


sound-list-request@xxxxxxxxxx wrote:

Send Sound-list mailing list submissions to
	sound-list@xxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
	https://listman.redhat.com/mailman/listinfo/sound-list
or, via email, send a message with subject or body 'help' to
	sound-list-request@xxxxxxxxxx

You can reach the person managing the list at
	sound-list-admin@xxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Sound-list digest..."

  

Today's Topics:

   1. RH 8.0 sound configuration problem (vivek)
   2. Re: RH 8.0 sound configuration problem (Bill Nottingham)
  

---

Subject:

[Sound] RH 8.0 sound configuration problem

From:

vivek <vivek@xxxxxxxxxxxxxxx>

Date:

Fri, 04 Apr 2003 10:20:45 +0600

To:

sound-list@xxxxxxxxxx

Hi,
     I have the same problem with my pci64 soundblaster live card.
RH 8.0 detects my card as VIA technologies, VT8233 AC97 Audio Controller,
and it is loading the module via82cxxx_audio.
When I play the test sound, the sound doesnt seem to play.
My card is PCI 64 SOUND BLASTER LIVE!
I had recently changed my mother board, therefore I have some doubt
if there is anything wrong with the jumper settings. It is an onboard
supported board with display and everything built into it.

What is the correct module for this card.

Here are the list of modules in the kernel sound modules directory :

ls -al /lib/modules/2.4.18-14/kernel/drivers/sound/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ac97_codec.o       btaudio.o          gus.o              msnd_pinnacle.o   
sb.o               uart6850.o
ac97.o             cmpci.o            i810_audio.o       nm256_audio.o     
sgalaxy.o          via82cxxx_audio.o
aci.o              cs4232.o           mad16.o            opl3.o            
sonicvibes.o       v_midi.o
ad1816.o           cs4281             maestro3.o         opl3sa2.o         
soundcore.o        wavefront.o
ad1848.o           cs46xx.o           maestro.o          opl3sa.o          
sound.o            ymfpci.o
adlib_card.o       emu10k1            maui.o             pas2.o            
sscape.o
aedsp16.o          es1370.o           mpu401.o           pss.o             
trident.o
audigy             es1371.o           msnd_classic.o     rme96xx.o         
trix.o
awe_wave.o         esssolo1.o         msnd.o             sb_lib.o          
uart401.o

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When I load the sb.o driver, it gives me the following error message :

/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: insmod
/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o failed
/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: insmod sb failed

My card had no problems running with the earlier versions of redhat I had,
which was RH 6.1, but I dont remember the module I used with that.

Please let me know what I must do in this case.
--
Vivek Prasannan
Systems Administrator
http://vivekonline.net
http://poornam.com
http://bobcares.com 

---

Subject:

[Sound] Re: RH 8.0 sound configuration problem

From:

Bill Nottingham <notting@xxxxxxxxxx>

Date:

Fri, 4 Apr 2003 00:33:39 -0500

To:

sound-list@xxxxxxxxxx

vivek (vivek@xxxxxxxxxxxxxxx) said: 
  

     I have the same problem with my pci64 soundblaster live card.
RH 8.0 detects my card as VIA technologies, VT8233 AC97 Audio Controller,
and it is loading the module via82cxxx_audio.
When I play the test sound, the sound doesnt seem to play.
My card is PCI 64 SOUND BLASTER LIVE!
    

Hm, your motherboard probably has built-in audio as well, that's
where the VIA dectection is coming in.

  

I had recently changed my mother board, therefore I have some doubt
if there is anything wrong with the jumper settings. It is an onboard
supported board with display and everything built into it.

What is the correct module for this card.
    

emu10k1 is the module for a SB Live.

Bill





  

_______________________________________________
Sound-list mailing list
Sound-list@xxxxxxxxxx
https://listman.redhat.com/mailman/listinfo/sound-list