[Sound] RH 8.0 sound configuration problem

[vivek <vivek@xxxxxxxxxxxxxxx>]

Hi,
     I have the same problem with my pci64 soundblaster live card.
RH 8.0 detects my card as VIA technologies, VT8233 AC97 Audio Controller,
and it is loading the module via82cxxx_audio.
When I play the test sound, the sound doesnt seem to play.
My card is PCI 64 SOUND BLASTER LIVE!
I had recently changed my mother board, therefore I have some doubt
if there is anything wrong with the jumper settings. It is an onboard
supported board with display and everything built into it.

What is the correct module for this card.

Here are the list of modules in the kernel sound modules directory :

ls -al /lib/modules/2.4.18-14/kernel/drivers/sound/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ac97_codec.o       btaudio.o          gus.o             
msnd_pinnacle.o    
sb.o               uart6850.o
ac97.o             cmpci.o            i810_audio.o       nm256_audio.o     
sgalaxy.o          via82cxxx_audio.o
aci.o              cs4232.o           mad16.o            opl3.o            
sonicvibes.o       v_midi.o
ad1816.o           cs4281             maestro3.o         opl3sa2.o         
soundcore.o        wavefront.o
ad1848.o           cs46xx.o           maestro.o          opl3sa.o          
sound.o            ymfpci.o
adlib_card.o       emu10k1            maui.o             pas2.o            
sscape.o
aedsp16.o          es1370.o           mpu401.o           pss.o             
trident.o
audigy             es1371.o           msnd_classic.o     rme96xx.o         
trix.o
awe_wave.o         esssolo1.o         msnd.o             sb_lib.o          
uart401.o

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When I load the sb.o driver, it gives me the following error message :

/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: insmod 
/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o failed
/lib/modules/2.4.18-14/kernel/drivers/sound/sb.o: insmod sb failed

My card had no problems running with the earlier versions of redhat I had,
which was RH 6.1, but I dont remember the module I used with that.

Please let me know what I must do in this case.
-- 
Vivek Prasannan
Systems Administrator
http://vivekonline.net
http://poornam.com
http://bobcares.com