[Sound] RH 8.0 sound problem (newbie)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]<

 



Hi all--

I've looked through the archives to see if i can figure this one out on my
own, but i have had no luck.

Could someone take a look at these configurations and tell me why my sound
is not working?  RH8 detects the card, but on the graphical sound card
screen, it says that it is disabled.  It identifies my card as a
Rockwell/Riptide card.

I've tried several attempts to modify my modules.conf file, but nothing
seems to work.

The following is my settings as taken from Windows (Linux settings follow):

Thanks in advance--

-----------
System Information report written at: 11/26/02 22:54:58
System Name: WWW-WVFI2BCYVQ8
[Conflicts/Sharing]

Resource	Device
I/O Port 0x00000000-0x00000CF7	PCI bus
I/O Port 0x00000000-0x00000CF7	Direct memory access controller

IRQ 9	Microsoft ACPI-Compliant System
IRQ 9	NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)
IRQ 9	Riptide Bus / Firmware Downloader
IRQ 9	Intel(r) 82801AA SMBus Controller

Memory Address 0xA0000-0xBFFFF	PCI bus
Memory Address 0xA0000-0xBFFFF	Intel(r) 82810 Graphics Controller

System Information report written at: 11/26/02 22:55:22
System Name: WWW-WVFI2BCYVQ8
[IRQs]

Resource	Device	Status
IRQ 9	Microsoft ACPI-Compliant System	OK
IRQ 9	NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)	OK
IRQ 9	Riptide Bus / Firmware Downloader	OK
IRQ 9	Intel(r) 82801AA SMBus Controller	OK
IRQ 5	Lucent Win Modem	OK
IRQ 13	Numeric data processor	OK
IRQ 8	System CMOS/real time clock	OK
IRQ 0	System timer	OK
IRQ 1	Standard 101/102-Key or Microsoft Natural PS/2 Keyboard	OK
IRQ 12	PS/2 Compatible Mouse	OK
IRQ 4	Communications Port (COM1)	OK
IRQ 6	Standard floppy disk controller	OK
IRQ 14	Primary IDE Channel	OK
IRQ 15	Secondary IDE Channel	OK
IRQ 11	Intel(r) 82801AA USB Universal Host Controller	OK
IRQ 3	Communications Port (COM2)	OK

System Information report written at: 11/26/02 22:55:13
System Name: WWW-WVFI2BCYVQ8
[I/O]

Resource	Device	Status
0x00000000-0x00000CF7	PCI bus	OK
0x00000000-0x00000CF7	Direct memory access controller	OK
0x00000D00-0x0000FFFF	PCI bus	OK
0x000003B0-0x000003BB	Intel(r) 82810 Graphics Controller	OK
0x000003C0-0x000003DF	Intel(r) 82810 Graphics Controller	OK
0x0000FEF8-0x0000FEFF	Lucent Win Modem	OK
0x0000FF00-0x0000FFFF	Lucent Win Modem	OK
0x0000FD00-0x0000FDFF	NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)	OK
0x0000FE80-0x0000FEBF	Riptide Bus / Firmware Downloader	OK
0x00000360-0x00000363	Riptide Audio Device	OK
0x00000209-0x00000209	Riptide Gameport	OK
0x00000A79-0x00000A79	ISAPNP Read Data Port	OK
0x00000279-0x00000279	ISAPNP Read Data Port	OK
0x00000274-0x00000277	ISAPNP Read Data Port	OK
0x00000080-0x00000080	Motherboard resources	OK
0x00001000-0x0000104F	Motherboard resources	OK
0x00001060-0x0000107F	Motherboard resources	OK
0x00001180-0x000011BF	Motherboard resources	OK
0x00001C00-0x00001C7F	Motherboard resources	OK
0x000004D0-0x000004D1	Motherboard resources	OK
0x00000600-0x0000067F	Motherboard resources	OK
0x00000010-0x0000001F	Motherboard resources	OK
0x00000024-0x00000025	Motherboard resources	OK
0x00000028-0x00000029	Motherboard resources	OK
0x0000002C-0x0000002D	Motherboard resources	OK
0x00000030-0x00000031	Motherboard resources	OK
0x00000034-0x00000035	Motherboard resources	OK
0x00000038-0x00000039	Motherboard resources	OK
0x0000003C-0x0000003D	Motherboard resources	OK
0x00000050-0x00000053	Motherboard resources	OK
0x00000072-0x00000077	Motherboard resources	OK
0x00000090-0x0000009F	Motherboard resources	OK
0x000000A4-0x000000A5	Motherboard resources	OK
0x000000A8-0x000000A9	Motherboard resources	OK
0x000000AC-0x000000AD	Motherboard resources	OK
0x000000B0-0x000000B5	Motherboard resources	OK
0x000000B8-0x000000B9	Motherboard resources	OK
0x000000BC-0x000000BD	Motherboard resources	OK
0x00000081-0x0000008F	Direct memory access controller	OK
0x000000C0-0x000000DF	Direct memory access controller	OK
0x000000F0-0x000000FE	Numeric data processor	OK
0x00000020-0x00000021	Programmable interrupt controller	OK
0x000000A0-0x000000A1	Programmable interrupt controller	OK
0x00000070-0x00000071	System CMOS/real time clock	OK
0x00000061-0x00000061	System speaker	OK
0x00000040-0x00000043	System timer	OK
0x00000060-0x00000060	Standard 101/102-Key or Microsoft Natural PS/2
Keyboard	OK
0x00000064-0x00000064	Standard 101/102-Key or Microsoft Natural PS/2
Keyboard	OK
0x000003F8-0x000003FF	Communications Port (COM1)	OK
0x00000378-0x0000037F	Printer Port (LPT1)	OK
0x000003F0-0x000003F5	Standard floppy disk controller	OK
0x000003F7-0x000003F7	Standard floppy disk controller	OK
0x000010A0-0x000010AF	Intel(r) 82801AA Bus Master IDE Controller	OK
0x000001F0-0x000001F7	Primary IDE Channel	OK
0x000003F6-0x000003F6	Primary IDE Channel	OK
0x00000170-0x00000177	Secondary IDE Channel	OK
0x00000376-0x00000376	Secondary IDE Channel	OK
0x00001080-0x0000109F	Intel(r) 82801AA USB Universal Host Controller	OK
0x000010B0-0x000010BF	Intel(r) 82801AA SMBus Controller	OK
0x000002F8-0x000002FE	Communications Port (COM2)	OK


Memory
0x80000000-0xFEBFFFFF	PCI bus	OK
0xF8000000-0xFBFFFFFF	Intel(r) 82810 Graphics Controller	OK
0xF4000000-0xF407FFFF	Intel(r) 82810 Graphics Controller	OK
0xFEBFFF00-0xFEBFFFFF	Lucent Win Modem	OK
0xFEBFFE00-0xFEBFFEFF	NETGEAR FA310TX Fast Ethernet Adapter (NGRPCI)	OK
0xFEBFE000-0xFEBFEFFF	Riptide Input Device	OK
0xFF800000-0xFFFFFFFF	Motherboard resources	OK
0xA0000-0xBFFFF	PCI bus	OK
0xA0000-0xBFFFF	Intel(r) 82810 Graphics Controller	OK


Components/Sound Device

Name	Unimodem Half-Duplex Audio Device
Manufacturer	Microsoft
Status	OK
PNP Device ID	MODEMWAVE\0\{8578B621-9E0E-4F80-AE7B-47308E567E82}
Driver	c:\windows\system32\drivers\modemcsa.sys (5.1.2600.0
(xpclient.010817-1148), 15.75 KB (16,128 bytes), 11/13/2002 12:48 PM)

Name	Riptide Audio Device
Manufacturer	Conexant
Status	OK
PNP Device ID	RPBOOT\AUDIO\5&2913D1D7&0&01
I/O Port	0x00000360-0x00000363
Driver	c:\windows\system32\drivers\crtaud.sys (5.12.01.0326, 41.13 KB
(42,112 bytes), 11/12/2002 6:13 PM)

--------

Setting from RedHat:


[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/version
Linux version 2.4.18-18.8.0 (bhcompile@xxxxxxxxxxxxxxxxxxxxx) (gcc
version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Nov 14 00:10:29
EST 2002

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/cpuversion
cat: /proc/cpuversion: No such file or directory

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 6
model name      : Celeron (Mendocino)
stepping        : 5
cpu MHz         : 501.140
cache size      : 128 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr
bogomips        : 994.61


[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corp. 82810 GMCH [Graphics Memory Controller Hub]
(rev 3).
  Bus  0, device   1, function  0:
    VGA compatible controller: Intel Corp. 82810 CGC [Chipset Graphics
Controller] (rev 3).
      IRQ 10.
      Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
      Non-prefetchable 32 bit memory at 0xf4000000 [0xf407ffff].
  Bus  0, device  30, function  0:
    PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 2).
      Master Capable.  No bursts.  Min Gnt=6.
  Bus  0, device  31, function  0:
    ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 2).
  Bus  0, device  31, function  1:
    IDE interface: Intel Corp. 82801AA IDE (rev 2).
      I/O at 0x10a0 [0x10af].
  Bus  0, device  31, function  2:
    USB Controller: Intel Corp. 82801AA USB (rev 2).
      IRQ 11.
      I/O at 0x1080 [0x109f].
  Bus  0, device  31, function  3:
    SMBus: Intel Corp. 82801AA SMBus (rev 2).
      IRQ 9.
      I/O at 0x10b0 [0x10bf].
  Bus  1, device   8, function  0:
    Communication controller: Lucent Microelectronics LT WinModem (rev
2).
      IRQ 10.
      Master Capable.  Latency=64.  Min Gnt=252.Max Lat=14.
      Non-prefetchable 32 bit memory at 0xf4100000 [0xf41000ff].
      I/O at 0x2400 [0x2407].
      I/O at 0x2000 [0x20ff].
  Bus  1, device   9, function  0:
    Ethernet controller: Lite-On Communications Inc LNE100TX (rev 32).
      IRQ 9.
      Master Capable.  Latency=64.
      I/O at 0x2800 [0x28ff].
      Non-prefetchable 32 bit memory at 0xf4100400 [0xf41004ff].
  Bus  1, device  10, function  0:
    Multimedia audio controller: Rockwell International Riptide PCI
Audio Controller (rev 0).
      Master Capable.  Latency=64.
      I/O at 0x2440 [0x247f].
  Bus  1, device  10, function  1:
    Communication controller: Rockwell International Riptide HCF 56k PCI
Modem (rev 0).
      Master Capable.  Latency=64.
      Non-prefetchable 32 bit memory at 0xf4110000 [0xf411ffff].
  Bus  1, device  10, function  2:
    Input device controller: Rockwell International Riptide PCI Game
Controller
(rev 0).
      Non-prefetchable 32 bit memory at 0xf4101000 [0xf4101fff].

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/cmdline
ro root=LABEL=/ hdc=ide-scsi

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/devices
Character devices:
  1 mem
  2 pty
  3 ttyp
  4 ttyS
  5 cua
  6 lp
  7 vcs
 10 misc
 13 input
 14 sound
 29 fb
 36 netlink
128 ptm
129 ptm
130 ptm
131 ptm
132 ptm
133 ptm
134 ptm
135 ptm
136 pts
137 pts
138 pts
139 pts
140 pts
141 pts
142 pts
143 pts
162 raw
180 usb
188 usb/tts/%d
226 drm

Block devices:
  1 ramdisk
  2 fd
  3 ide0
  9 md
 11 sr
 12 unnamed
 14 unnamed
 22 ide1
 38 unnamed
 39 unnamed

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/misc
175 agpgart
135 rtc
  1 psaux
134 apm_bios
 25 synth

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/filesystems
nodev   rootfs
nodev   bdev
nodev   proc
nodev   sockfs
nodev   tmpfs
nodev   shm
nodev   pipefs
        ext2
nodev   ramfs
        iso9660
nodev   devpts
        ext3
nodev   usbdevfs
nodev   usbfs
        vfat
nodev   autofs

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/interrupts
           CPU0
  0:     279086          XT-PIC  timer
  1:        415          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
  9:       1078          XT-PIC  eth0
 10:        703          XT-PIC  i810@xxx:0:1:0
 11:         16          XT-PIC  usb-uhci
 12:      11063          XT-PIC  PS/2 Mouse
 14:      11386          XT-PIC  ide0
 15:       4259          XT-PIC  ide1
NMI:          0
ERR:          0

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/iomem
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0feeffff : System RAM
  00100000-002488da : Kernel code
  002488db-0033fe63 : Kernel data
0fef0000-0feffbff : ACPI Tables
0feffc00-0fefffff : ACPI Non-volatile Storage
0ff00000-0fffffff : reserved
f4000000-f407ffff : Intel Corp. 82810 CGC [Chipset Graphics Controller]
f4100000-f41000ff : Lucent Microelectronics LT WinModem
f4100400-f41004ff : Lite-On Communications Inc LNE100TX
  f4100400-f41004ff : tulip
f4101000-f4101fff : Rockwell International Riptide PCI Game Controller
f4110000-f411ffff : Rockwell International Riptide HCF 56k PCI Modem
f8000000-fbffffff : Intel Corp. 82810 CGC [Chipset Graphics Controller]
fff00000-ffffffff : reserved

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1080-109f : Intel Corp. 82801AA USB
  1080-109f : usb-uhci
10a0-10af : Intel Corp. 82801AA IDE
  10a0-10a7 : ide0
  10a8-10af : ide1
10b0-10bf : Intel Corp. 82801AA SMBus
2000-20ff : Lucent Microelectronics LT WinModem
2400-2407 : Lucent Microelectronics LT WinModem
2440-247f : Rockwell International Riptide PCI Audio Controller
2800-28ff : Lite-On Communications Inc LNE100TX
  2800-28ff : tulip

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/dma
 4: cascade

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/mtrr
reg00: base=0x00000000 (   0MB), size= 256MB: write-back, count=1
reg01: base=0xf8000000 (3968MB), size=  64MB: write-combining, count=2

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/modules
sr_mod                 18168   0 (autoclean)
soundcore               6532   0 (autoclean)
i810                   72736   1
agpgart                43136   7 (autoclean)
parport_pc             19108   1 (autoclean)
lp                      8996   0 (autoclean)
parport                37152   1 (autoclean) [parport_pc lp]
autofs                 13348   0 (autoclean) (unused)
tulip                  43552   1
ipt_REJECT              3736   6 (autoclean)
iptable_filter          2412   1 (autoclean)
ip_tables              14936   2 [ipt_REJECT iptable_filter]
ide-scsi               10512   0
scsi_mod              107240   2 [sr_mod ide-scsi]
ide-cd                 33608   0
cdrom                  33696   0 [sr_mod ide-cd]
nls_iso8859-1           3516   2 (autoclean)
nls_cp437               5148   2 (autoclean)
vfat                   13084   2 (autoclean)
fat                    38712   0 (autoclean) [vfat]
ipaq                    7356   0 (unused)
usbserial              22108   0 [ipaq]
mousedev                5524   1
keybdev                 2976   0 (unused)
hid                    22244   0 (unused)
input                   5920   0 [mousedev keybdev hid]
usb-uhci               26188   0 (unused)
usbcore                77024   1 [ipaq usbserial hid usb-uhci]
ext3                   70368   2
jbd                    52212   2 [ext3]

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /proc/modules
sr_mod                 18168   0 (autoclean)
soundcore               6532   0 (autoclean)
i810                   72736   1
agpgart                43136   7 (autoclean)
parport_pc             19108   1 (autoclean)
lp                      8996   0 (autoclean)
parport                37152   1 (autoclean) [parport_pc lp]
autofs                 13348   0 (autoclean) (unused)
tulip                  43552   1
ipt_REJECT              3736   6 (autoclean)
iptable_filter          2412   1 (autoclean)
ip_tables              14936   2 [ipt_REJECT iptable_filter]
ide-scsi               10512   0
scsi_mod              107240   2 [sr_mod ide-scsi]
ide-cd                 33608   0
cdrom                  33696   0 [sr_mod ide-cd]
nls_iso8859-1           3516   2 (autoclean)
nls_cp437               5148   2 (autoclean)
vfat                   13084   2 (autoclean)
fat                    38712   0 (autoclean) [vfat]
ipaq                    7356   0 (unused)
usbserial              22108   0 [ipaq]
mousedev                5524   1
keybdev                 2976   0 (unused)
hid                    22244   0 (unused)
input                   5920   0 [mousedev keybdev hid]
usb-uhci               26188   0 (unused)
usbcore                77024   1 [ipaq usbserial hid usb-uhci]
ext3                   70368   2
jbd                    52212   2 [ext3]

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 tulip
alias usb-controller usb-uhci
#alias sound sb
alias sound-slot-0
#alias midi opl3
alias sound-module-0 op13
options opl3 io=0x388
options sb io=0x220 irq=9 dma=0,1

[jeff@xxxxxxxxxxxxxxxxxxx jeff]$ dmesg
Linux version 2.4.18-18.8.0 (bhcompile@xxxxxxxxxxxxxxxxxxxxx) (gcc
version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Thu Nov 14 00:10:29
EST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e9400 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
 BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data)
 BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS)
 BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/ hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 501.140 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 994.61 BogoMIPS
Memory: 252064k/261056k available (1314k kernel code, 6568k reserved,
989k data, 172k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=31762 max_file_pages=0 max_inodes=0 max_dentries=31762
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU:             Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 05
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
PCI: Found IRQ 10 for device 01:08.0
PCI: Sharing IRQ 10 with 00:01.0
PCI: Found IRQ 9 for device 01:09.0
PCI: Sharing IRQ 9 with 00:1f.3
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup:  initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD800BB-00CAA1, ATA DISK drive
hdc: Hewlett-Packard CD-Writer Plus 8000, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03afd84, I/O limit 4095Mb (mask 0xffffffff)
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=10337/240/63,
UDMA(33)
ide-floppy driver 0.99.newide
hdd: 98304kB, 196608 blocks, 512 sector size
hdd: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
 hdd: hdd4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 126k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
 hdd: hdd4
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 172k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:32:08 Nov 14 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1080, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x49f/0x3) is not claimed by any active
driver.
 hdd: hdd4
 hdd: hdd4
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,8), internal journal
Adding Swap: 2041160k swap-space (priority -1)
 hdd: hdd4
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for Compaq iPAQ
usbserial.c: Compaq iPAQ converter detected
usbserial.c: Compaq iPAQ converter now attached to ttyUSB0 (or usb/tts/0
for devfs)
ipaq.c: USB Compaq iPAQ, HP Jornada, Casio EM500 driver v0.2
 hdd: hdd4
 hdd: hdd4
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HP        Model: CD-Writer+ 8000   Rev: 2.3C
  Type:   CD-ROM                             ANSI SCSI revision: 02
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: Printer, Samsung ML-4500
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
PCI: Enabling device 01:09.0 (0104 -> 0107)
PCI: Found IRQ 9 for device 01:09.0
PCI: Sharing IRQ 9 with 00:1f.3
tulip0:  MII transceiver #1 config 3000 status 7829 advertising 01e1.
divert: allocating divert_blk for eth0
eth0: Lite-On 82c168 PNIC rev 32 at 0xd09b1400, 00:A0:CC:5C:46:85, IRQ
9.
 hdd: hdd4
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: Printer, Samsung ML-4500
lp0: using parport0 (polling).
lp0: console ready
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected an Intel i810 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 0
mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12





[Index of Archives]     [Sound Cards]     [Kernel]     [Red Hat Install]     [Drives]     [Red Hat Development]     [Video 4 Linux]     [Gimp Users]     [Yosemite Trails]

  Powered by Linux