I'm going to ask a stupid question. Is this 3COM on the docking station or a PCMCIA? If on the dock, is the a/c adapter powering the docking station or are you on battery. I get this error if I don't have AC power to my dock because the battery doesn't seem to power it. <<JAV>> ---------- Original Message ----------- From: Chas Simpson <csimpson@xxxxxxxxxxxxxxxxxxxxxx> To: shrike-list@xxxxxxxxxx Sent: Sun, 28 Sep 2003 10:54:44 +0200 (SAST) Subject: eth0 device not present > Hi, > > I've just installed rh9 onto my laptop (armada m700) and I get the > following error during the boot sequence: > > Bringing up eth0: 3c59x device eth0 does not seem to be present. > Delaying intialization > > It detected the ethernet card correctly (3Com 10/100 model > 3CCFE575CT) during installation. Why is it having a problem now?? > I saw on the net that there is a patch for AMD but what about for > intel? Also it was suggested that the kernel should be updated. My > kernel version is : > 2.4.20-8 > > What actually is going wrong? > > Many thanks for the help. > > Chas > > -- > _______________________________________________ > Chas Simpson > Computational Chemistry > University of Cape Town > South Africa > e-mail: csimpson@xxxxxxxxxxxxxxxxxxxxxx > http://hydrogen.cem.uct.ac.za/compchem/ > _______________________________________________ > > -- > Shrike-list mailing list > Shrike-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/shrike-list ------- End of Original Message ------- -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
