hi antonio below is the contents of the modules.conf file alias eth0 3c59x alias usb-controller ehci-hcd alias usb-controller1 usb-uhci alias sound-slot-0 i810_audio post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : please check & let me know wht needs to be done. thanx in advance regards Valeed ----- Original Message ----- From: "antonio" <anto.montagnani@xxxxxxxxxxx> To: <shrike-list@xxxxxxxxxx> Sent: Saturday, September 13, 2003 4:31 PM Subject: Re: help configure my printer > valeed wrote: > > >Hi Ric, > >Thanx for ur reply , i checked the modules.conf file but there is no line > >as 'parport_lowlevel parport_pc' > >also there are no old printers in the /var/spool/lpd directory > > > >i have just one printer which is connecte dto the local printer port . > > > >regards > > > >valeed > > > >----- Original Message ----- > >From: "Rick Malt" <ric@xxxxxxxxxxxxx> > >To: <shrike-list@xxxxxxxxxx> > >Sent: Saturday, September 13, 2003 1:45 PM > >Subject: Re: help configure my printer > > > > > > > > > >>r u trying local or network/remote printer ? > >>when u start printtool is it detecting the printer ? > >>is the line alias 'parport_lowlevel parport_pc' present in your > >>/etc/modules.conf file. > >>check the /var/spool/lpd directory for any unwanted/old printer > >>directories. > >>delete unwanted dir's and reconfigure with printtool > >> > >>Also try reading Printing-HOWTO and Printing-Usage-Howto from tldp.org > >> > >>Ric > >> > >>Valeed Mulla wrote: > >> > >> > >> > >>>hi all! > >>>i am trying to configure my printer but unable to do it , please help > >>>i have an hp laserjet 5L , the kudzu recognises it , but the printer > >>>configuration doesnt print the test page , tried several times > >>>its just one error message i get > >>> > >>>There was a problem sending CUPS test page to printer que > >>>lpr: unable to print file : server-error-service-unavailable > >>> > >>> > >>>I have also tried the printconf from te command mode but still the same > >>> > >>>please help me to configure a basic printing . > >>> > >>> > >>>regards > >>> > >>>valeed > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >> > >>-- > >>Shrike-list mailing list > >>Shrike-list@xxxxxxxxxx > >>https://www.redhat.com/mailman/listinfo/shrike-list > >> > >> > >> > >> > > > > > > > > > > > Can you post here your modules.conf??? > > Antonio > > -- > > > ============================================== > Written with Mozilla 1.4 on Linux RedHat 9 > ============================================== > > > > -- > Shrike-list mailing list > Shrike-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/shrike-list > > -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
