Hi Joe, Thanks for your response. On Sun, 2003-08-17 at 08:29, Joe wrote: > > > >I have a PC running on hardware RAID-0 (RAID pci controller). The HD is > >partitioned into 2, C and D. Drive-C is running Win2K and Drive-D has > >not been formatted yet. > > > What kind of raid controller? Is it fully transparent to the OS, and/or > does it support Linux? High Point RAID controller. It supports Linux. Previous I have installed RH9.0 solely on this PC without partition and it ran without problem. Sorry I don't understand "fully transparent to the OS" > > > >How shall be the desgination of drives if to install RH9.0 on Drive-D > >(how the drives will be displayed) > > >1) Automaticly partition > >2) Manaully partition > > > > > Either one will work - but I always manually partition to make sure of > what I'm getting. > > BTW drive letters are merely a peecee-ism, there are no drive letters in > unix OSes I have tried to install RH9.0 after having installed Win2K. It asked where to install RH9.0, hda or hdc. There was not hdb therefore I hesitate to proceed. B.R. Stephen Got an I Care HK! Idea? Go to http://www.iCareHK.com/iCarehk/index.html to Submit. -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
