Hi
I have the problem - I can't make my modem work. Can you help me ?
When I issue the following commands, I receive:
$ wvdial
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
$ wvdialconf
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 4800 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 4800 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 19200 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 19200 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 4800 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 4800 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 19200 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 19200 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2 S3 S4 S5 S6 S7 S8 S9
Port Scan<*1>: S10 S11 S12 S13 S14 S15 S16 S17
Port Scan<*1>: S18 S19 S20 S21 S22 S23 S24 S25
Port Scan<*1>: S26 S27 S28 S29 S30 S31 SA0 SA1
Port Scan<*1>: SA2 SC0 SC1 SC2 SC3 SI0 SI1 SI2
Port Scan<*1>: SI3 SI4 SI5 SI6 SI7 SI8 SI9 SI10
Port Scan<*1>: SI11 SI12 SI13 SI14 SI15 SR0 SR1 SR2
Port Scan<*1>: SR3 SR4 SR5 SR6 SR7 SR8 SR9 SR10
Port Scan<*1>: SR11 SR12 SR13 SR14 SR15 SR16 SR17 SR18
Port Scan<*1>: SR19 SR20 SR21 SR22 SR23 SR24 SR25 SR26
Port Scan<*1>: SR27 SR28 SR29 SR30 SR31 SR256 SR257 SR258
Port Scan<*1>: SR259 SR260 SR261 SR262 SR263 SR264 SR265 SR266
Port Scan<*1>: SR267 SR268 SR269 SR270 SR271 SR272 SR273 SR274
Port Scan<*1>: SR275 SR276 SR277 SR278 SR279 SR280 SR281 SR282
Port Scan<*1>: SR283 SR284 SR285 SR286 SR287 USB0 USB1 USB2
Port Scan<*1>: USB3 USB4 USB5 USB6 USB7 USB8 USB9 USB10
Port Scan<*1>: USB11 USB12 USB13 USB14 USB15
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5399 errors:0 dropped:0 overruns:0 frame:0
TX packets:5399 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:340468 (332.4 Kb) TX bytes:340468 (332.4 Kb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.64.64.64 P-t-P:10.112.112.112 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
And files:
# "/etc/wvdial.conf" file:
[Dialer Defaults]
Modem = /dev/ttyS0
Baud = 57600
SetVolume = 3
Dial Command = ATDP
Init1 = ATZ
FlowControl = NOFLOW
[Dialer TPSA]
Username = ppp
Password = ppp
Phone = 0202122
# part of "/etc/sysconfig/hwconfig" file:
-
class: MODEM
bus: PCI
detached: 0
driver: unknown
desc: "Conexant|HSF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (WorldW
SmartDAA)"
vendorId: 14f1
deviceId: 2045
subVendorId: 14f1
subDeviceId: 2045
pciType: 1
-
What should I do to make my modem work ?
Luke.
--
Shrike-list mailing list
Shrike-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/shrike-list
