Update to the latest kernel from RedHat using up2date and your woes shouldWell, I finally got a chance to tether my laptop physically to the network once again.
go away. Mind did with my Linksys v3.0 on my Compaq Armada M700 once I did
this.
Also, I got rid of my Linksys WAP11 2.2 access point and got a D-Link 800AP+ repeater (also functions as an access point) and now I get great reception of signal and only had the signal drop once. It is working
beautifully.
HTH. YMMV
Keith B. glenn@xxxxxxxxxxx wrote:
Hi all,
Having just installed Shrike (my first linux OS install) on my gateway 9500, I was happy to see that my Linksys WPC11 V3.0 wireless card had been detected, and once I had input SSID, etc, seemed to work just fine.
However after a couple of minutes it stopped working. After a little expermintation, it seems the card will work for 2.5 minutes from the interface being brought up, each and everytime I restart the interface.
Does anyone have any idea what could be causing this, and what I could do to resolve the problem?
Glenn.
-- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
I ran up2date, and now have the updated kernel.
Unfortunately I still have the same problem. Every 2-3 minutes, I need to take my eth1 down and back up in order to keep my wireless link running.
What do I have set wrong?
How do I fix it?
If I need a more Linux friendly wifi card, what is best?
TIA
Glenn.
