Peter (pboy@xxxxxxxxxxxxxxxxxxxxx) said: > Remaining problem: ACPI is not supported by RH 9 yet. While not using > the system after some time the display is turned off, you can turn it on > again by just hitting a key - usually. It does not work with RH 9, yet, > the display remains in its power saving mode. A workaround is to close > the LCD cover, wait some seconds and re-open it. The LCD is turn on by > some hardware mechanism. Alternatively, you can disable display blanking in the BIOS. Speedstep support for CPU scaling was just done for the 2.5 kernel, and backporting the patch to 2.4 seems to work well in very brief testing. Bill
