The modem lights are not on after i connect it to my box. I used to wvdial to my ISP with my old 33.6 k serial modem.
Heres my /var/log/messages when I connect the modem to my usb port.
-------------
Jun 5 09:23:33 ric kernel: hub.c: new USB device 00:1f.2-2, assigned address 3
Jun 5 09:23:33 ric kernel: usb.c: USB device 3 (vend/prod 0xbaf/0xec) is not claimed by any active driver.
Jun 5 09:23:36 ric /etc/hotplug/usb.agent: ... no modules for USB product baf/ec/1
---------------
and the /proc/bus/usb/devices
-------------- T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=2440 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0baf ProdID=00ec Rev= 0.01 S: Manufacturer=U.S. Robotics S: Product=U.S. Robotics 56K Faxmodem USB S: SerialNumber=USBHCF00000006 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=150mA I: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms ------------------ any insights ?
