There is a segmentation fault with "modprobe hptraid". This works
under RH8.0 and maybe earlier as well (can't remember back that far :-)
I used to to get an oops as well:
/sbin/modprobe hptraid
Unable to handle kernel paging request at virtual address e002c044
printing eip:
e09a378a
*pde = 00000000
Oops: 0002
hptraid ataraid parport_pc lp parport autofs via-rhine mii sg sr_mod
ide-scsi sc
si_mod ide-cd cdrom reiserfs keybdev mousedev hid input usb-uhci usbcore
ext3
CPU: 0
EIP: 0060:[<e09a378a>] Not tainted
EFLAGS: 00010246
EIP is at probedisk [hptraid] 0x192 (2.4.20-8)
eax: 00040040 ebx: 00000000 ecx: 00000000 edx: dffec000
esi: 00001002 edi: 00000040 ebp: 00000003 esp: db54febc
ds: 0068 es: 0068 ss: 0068
Process modprobe (pid: 2960, stackpage=db54f000)
Stack: 00000300 00000003 00000000 00000003 00000041 c259f680 00000300
00000000
00000000 00000000 00000000 00000000 e09a389b 00000003 00000040
00000000
00000000 00000001 00000001 e09a3000 e09a3a4e 00000000 ffffffea
00000001
Call Trace: [<e09a389b>] hptraid_init_one [hptraid] 0x47 (0xdb54feec))
[<e09a3a4e>] init_module [hptraid] 0x2a (0xdb54ff0c))
[<c011c6e1>] sys_init_module [kernel] 0x4e5 (0xdb54ff1c))
[<e09a3060>] hptraid_ioctl [hptraid] 0x0 (0xdb54ff20))
[<e09a3d78>] .kmodtab [hptraid] 0x0 (0xdb54ff2c))
[<e09a3060>] hptraid_ioctl [hptraid] 0x0 (0xdb54ff58))
[<c01093b3>] system_call [kernel] 0x33 (0xdb54ffc0))
Code: 89 4c 02 04 8b 44 24 14 8b 48 08 8b 44 24 10 d3 e0 39 c6 7c
Segmentation fault
I don't know what's wrong. The hptraid.c code looks the same in RH9 as
in RH8. But it seg faults. The same options are passed in via grub for
ide2 and ide3: ide2=0xdc00,0xe002,11 ide3=0xe400,0xe802,11
and lspci -v shows:
00:13.0 Unknown mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372 (rev 04)
Subsystem: Triones Technologies, Inc. HPT370A
Flags: bus master, 66Mhz, medium devsel, latency 120, IRQ 11
I/O ports at dc00 [size=8]
I/O ports at e000 [size=4]
I/O ports at e400 [size=8]
I/O ports at e800 [size=4]
I/O ports at ec00 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
lsmod shows:
# lsmod
Module Size Used by Tainted: P
hptraid 11520 1 (initializing)
ataraid 9252 0 [hptraid]
etc..
So what changed in RH9 ?
I would appreciate any help or suggestions.
Thank You,
Paul Francis
