Thanks for the lead! I'm downloading the 2.4.21-pre7 kernel and ACPI patches right now.
Do you have a detailed write-up on making it all work?
Z wrote:
Sure...
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% With stock 2.4.20-8:
Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: No IRQ known for interrupt pin A of device 01:02.0. Please try using pci=biosirq. PCI: No IRQ known for interrupt pin B of device 01:02.1. Please try using pci=biosirq. ds: no socket drivers loaded! %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
With custom 2.4.21-pre7-ACPI:
Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Yenta IRQ list 0cb8, PCI irq9 Socket status: 30000810 Yenta IRQ list 0cb8, PCI irq9 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. hermes.c: 4 Dec 2002 David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx> orinoco.c 0.13b (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx> and others) orinoco_cs.c 0.13b (David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx> and others) eth1: Station identity 001f:0002:0000:0008 eth1: Looks like an Intersil firmware version 0.8.2 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:05:5D:F1:1F:2E eth1: Station name "Prism I" eth1: ready eth1: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f ip_tables: (C) 2000-2002 Netfilter core team eth1: New link status: Connected (0001) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). ACPI: AC Adapter [ACAD] (off-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-- Greg Gulik http://www.gulik.org/greg/ greg @ gulik.org
