On Fri, 2003-04-04 at 11:59, Tim Ryder wrote:
> Different problem, my pcmcia startup script doesnt have the .o on the
> end of the yetna_socket line.
>
> Tim
>
My apologies, look for this section:
if [ -d $PC ] ; then
echo -n " modules"
/sbin/modprobe pcmcia_core.o $CORE_OPTS
/sbin/modprobe $PCIC.o $PCIC_OPTS
/sbin/modprobe ds.o
elif [ -d $KD ] ; then
/sbin/modprobe pcmcia_core
/sbin/modprobe $PCIC
/sbin/modprobe ds
else
echo $" module directory $PC not found."
break
fi
and remove the '.o' from the top section (I think, I added the .o back
in), I should have said pcmcia_core, $PCIC and ds...
-josh
>
> On Fri, 2003-04-04 at 14:56, Joshua Legbandt wrote:
> > On Fri, 2003-04-04 at 09:49, Robert P. J. Day wrote:
> > > On 4 Apr 2003, Tim Ryder wrote:
> > >
> > > > After the install of RedHat 9, i get this message when i try to start
> > > > pcmcia services.
> > > >
> > > > Starting PCMCIA
> > > > services:/lib/modules/2.4.20-8/kernel/drivers/pcmcia/yenta_socket.o:
> > > > init_module: No such device
> > > > Hint: insmod errors can be caused by incorrect module parameters,
> > > > including invalid IO or IRQ parameters.
> > > > You may find more information in syslog or the output from dmesg
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/yenta_socket.o: insmod
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/yenta_socket.o failed
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/yenta_socket.o: insmod
> > > > yenta_socket
> > > > failed
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/ds.o: init_module: Operation
> > > > not permitted
> > > > Hint: insmod errors can be caused by incorrect module parameters,
> > > > including invalid IO or IRQ parameters.
> > > > You may find more information in syslog or the output from dmesg
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/ds.o: insmod
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/ds.o failed
> > > > /lib/modules/2.4.20-8/kernel/drivers/pcmcia/ds.o: insmod ds failed
> > > > cardmgr.
> > > >
> > > > I ran the RH Hardware browser and confirmed that i do have a
> > > > yenta_socket.
> > > >
> > > > Has anyone else seen this issue.
> > >
> > > yup, i posted about that recently. did that posting not make it out
> > > to this list?
> > >
> > > in a nutshell, after installing on my inspiron 8100, everything
> > > worked fine -- my pcmcia linksys net card did what it was supposed
> > > to, etc.
> >
> > I ran into the same problem after I recompiled my kernel to turn on
> > acpi, the easy solution is to modify the init script for pcmcia and
> > remove the '.o' at the end of yenta_socket.o, ds.o and $PCIC.o
> >
> > Restart pcmcia with /etc/init.d/pcmcia restart and it should work (at
> > least it did for me). I can't verify whether my pcmcia card worked
> > before the new kernel since I hadn't tried it, but I remember having a
> > similar problem with pheobe...
> >
> > -josh
> >
> > --
> > Joshua Legbandt <jtlegbandt@xxxxxxxxxxxxx>
> >
> >
--
Joshua Legbandt <jtlegbandt@xxxxxxxxxxxxx>
