lspci -v 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 11) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, fast devsel, latency 0 Capabilities: [88] #09 [f205] 00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 11) (prog-if 00 [VGA]) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 9 Memory at f8000000 (32-bit, prefetchable) [size=64M] Memory at f4000000 (32-bit, non-prefetchable) [size=512K] Capabilities: [dc] Power Management version 2 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: f4100000-f41fffff 00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03) (prog-if 80 [Master]) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, medium devsel, latency 0 I/O ports at 1800 [size=16] 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1820 [size=32] 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03) Subsystem: Sony Corporation: Unknown device 80e0 Flags: medium devsel, IRQ 9 I/O ports at 1810 [size=16] 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1840 [size=32] 00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev 03) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1c00 [size=256] I/O ports at 1880 [size=64] 00:1f.6 Modem: Intel Corp. Intel 537 [82801BA/BAM AC'97 Modem] (rev 03) (prog-if 00 [Generic]) Subsystem: Sony Corporation: Unknown device 80e0 Flags: medium devsel, IRQ 9 I/O ports at 2400 [size=256] I/O ports at 2000 [size=128] 01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02) (prog-if 10 [OHCI]) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, medium devsel, latency 64, IRQ 9 Memory at f4105000 (32-bit, non-prefetchable) [size=2K] Memory at f4100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 01:02.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) Subsystem: Sony Corporation: Unknown device 80e0 Flags: bus master, medium devsel, latency 0 Memory at 10000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=01, secondary=02, subordinate=05, sec-latency=0 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 16-bit legacy interface ports at 0001 01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet Controller (rev 03) Subsystem: Intel Corp. EtherExpress PRO/100 VE Flags: bus master, medium devsel, latency 66, IRQ 9 Memory at f4104000 (32-bit, non-prefetchable) [size=4K] I/O ports at 3000 [size=64] Capabilities: [dc] Power Management version 2 dmesg gives this info about it PCI: No IRQ known for interrupt pin A of device 01:02.0. ds: no socket drivers loaded! ds: no socket drivers loaded! PCI: No IRQ known for interrupt pin A of device 01:02.0. Databook TCIC-2 PCMCIA probe: not found. PCI: No IRQ known for interrupt pin A of device 01:02.0. ds: no socket drivers loaded! usb-uhci.c: interrupt, status 2, frame# 12 Device not ready. Make sure there is a disc in the drive. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table Device not ready. Make sure there is a disc in the drive. sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 unable to read partition table PCI: No IRQ known for interrupt pin A of device 01:02.0. PCI: No IRQ known for interrupt pin A of device 01:02.0. ds: no socket drivers loaded! PCI: No IRQ known for interrupt pin A of device 01:02.0. ds: no socket drivers loaded! PCI: No IRQ known for interrupt pin A of device 01:02.0. ds: no socket drivers loaded! Tim On Fri, 2003-04-04 at 14:40, Bill Nottingham wrote: > Tim Ryder (tryder@xxxxxxxxxxxxxxx) said: > > Here's the output. > > It says the cardbus bridge is Ricoh, would that fall under the yenta > > socket driver. > > It should, yes. Actually, what's the output of 'lspci -v'? Are > there any messages from the kernel (in 'dmesg', or /var/log/messages) > when you try to load yenta_socket by hand? > > Bill > >