RE: A simple question on mouse AGAIN

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



No Problems.

The other thing I forgot to mention was to disable the Plug-n-Play OS part
in the BIOS. Set it to no PNP OS. As I think that can also cause havoc with
these devices.

Wolf

-----Original Message-----
From: Stephen Liu [mailto:satimis@xxxxxxxxxxxx] 
Sent: Thursday, 26 June 2003 6:31 PM
To: psyche-list@xxxxxxxxxx
Subject: RE: A simple question on mouse AGAIN


Hi Wolfgang,

Thanks for your response.

Occasionally my USB mouse could be detected at starting PC.  The pointer
stood unmoved compelling me to reboot.  After reboot it worked normally.  I
could not explained what has been happened.  I expect to find an easy way to
re-detect it avoiding reboot.  However "mouseconfig" could not solve my
problem.

Now it works normal

#lsmod
.....
......
scsi_mod              107240   1  [ide-scsi]
ide-cd                 33608   0
cdrom                  33696   0  [ide-cd]
mousedev                5524   1
keybdev                 2976   0  (unused)
hid                    22244   0  (unused)
input                   5920   0  [mousedev keybdev hid]
usb-uhci               26188   0  (unused)
usbcore                77056   1  [hid usb-uhci]
ext3                   70336   2
jbd                    52212   2  [ext3]

Next time when it has problem I will issue "lsmod" to check.

Thanks

B.R.
Stephen


On Thu, 2003-06-26 at 13:19, Wolfgang Gill wrote:
> Are you sure that the USB drivers are loading properly??? As I have 
> run both Logitech Mouseman Cordless Optical and the Cordless MX-700 
> mice without problems. Without the USB and Hid (Human interface 
> Device) drivers loaded, you will not be able to use the mouse. (I'm 
> running the MX-700 on the USB port as I write this message)
> 
> You should see something like this when you run lsmod from the command 
> line.
> 
> keybdev                 2912   0  (unused)
> mousedev                5428   1
> hid                    21892   0  (unused)
> input                   5792   0  [keybdev mousedev hid]
> ehci-hcd               19784   0  (unused)
> usb-uhci               25996   0  (unused)
> usbcore                78272   1  [hid ehci-hcd usb-uhci]
> 
> If you don't see anything in relation to the 'usbcore' stuff, then it 
> may be likely that the USB ports may be disabled in the BIOS. Just go 
> into the BIOS and enable the USB ports. You should see it somewhere in 
> the 'Intergrated Peripherals' section if you BIOS has it.
> 
> Wolf
> 
> -----Original Message-----
> From: Stephen Liu [mailto:satimis@xxxxxxxxxxxx]
> Sent: Thursday, 26 June 2003 4:05 PM
> To: psyche-list@xxxxxxxxxx
> Subject: A simple question on mouse AGAIN
> 
> 
> Hi all folks,
> 
> USB Optical mouse
> =================
> 
> After booting up PC the captioned mouse has not been detected.  I 
> started "TEST MODE" with Ctrl+Alt+F2 and issued "mouseconfig" command. 
> After having reselected the mouse I changed back to Graphic Mode.  But 
> the mouse still could not be detected compelling me to reboot the PC
> 
> Any advice?
> 
> TIA
> 
> B.Regards

######################################################################
Attention: 
This e-mail message is privileged and confidential. If you are not the 
intended recipient please delete the message and notify the sender. 
Any views or opinions presented are solely those of the author.

This e-mail has been scanned and cleared by MailMarshal 
www.marshalsoftware.com
######################################################################


-- 
Psyche-list mailing list
Psyche-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/psyche-list

[Index of Archives]     [Fedora General Discussion]     [Red Hat General Discussion]     [Centos]     [Kernel]     [Red Hat Install]     [Red Hat Watch]     [Red Hat Development]     [Red Hat 9]     [Gimp]     [Yosemite News]

  Powered by Linux