So you have added the 'hdc=ide-scsi' to grub?? I ran a cdrecord -scanbus on my system and my CDR/W shows up on 1,0,0 and it's a RICOH MP9200. I use Xcdroast to burn CD's and it works ok. It's might also be worth checking the drives sym links. As I have had a few problems in the past with them. When I was trying to configure Xine correctly the sym links got stuffed up, and I couldn't burn CD's anymore. It's worth looking into. Wolf -----Original Message----- From: eric@xxxxxxxxxxx [mailto:eric@xxxxxxxxxxx] Sent: Tuesday, 22 April 2003 1:41 PM To: psyche-list@xxxxxxxxxx Subject: CDR Problems I have redhat 8.0 on an AMD Athlon 1200. My CDRW is a Yamaha CRW1200EZ that is the primary cdrom. i have it set up as ide-scsi through scd0. When I do a cdrecord -scanbus it see it at 0,0,0 but when i try to write to it, it hangs up for a minute and then says "CD/DVD-recorder not ready" and the drive won't respond. I've tried everything that i could find on boards but i can't get it to work.Is there a known problem with any modules or with this drive? ###################################################################### Attention: This e-mail message is privileged and confidential. If you are not the intended recipient please delete the message and notify the sender. Any views or opinions presented are solely those of the author. This e-mail has been scanned and cleared by MailMarshal www.marshalsoftware.com ###################################################################### -- Psyche-list mailing list Psyche-list@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/psyche-list
