I've got the same problem in RH8.0 after I changed the hostname with the GUI tool. During the initialization it syas that can't find the eth0, but actualy I get always an IP address. You can change this in the rc3.d or rc5.d PCMCIA to be initialized before the network ( the numeber after SXXPCMCIA has to be smaller then in SXXnetwork). 2ib ----- Original Message ----- From: "Patrick Marquetecken" <patrick.marquetecken@pandora.be> To: "Psyche redhat" <psyche-list@redhat.com> Sent: Wednesday, March 05, 2003 9:34 PM Subject: PCMCIA network at boot > Hi, > > I'm trying to get my Lucent Orinoco to activate at boot time. > It wont work, my network it tries to load it before pcmcia. > With a script works it. > > My system RH 7.3 > > /etc/sysconfig/network-scripts/ifcfg-eth0 > USERCTL='no' > DHCP_HOSTNAME='' > BOOTPROTO='dhcp' > HWADDR='00:02:2d:3b:e9:85' > DEVICE='eth0' > TYPE='Wireless' > Device=eth0 > ONBOOT='yes' > PEERDNS='yes' > CHANNEL='1' > MODE='Managed' > KEY='s:xxxx' > RATE='11Mb/s' > IPADDR='' > GATEWAY='' > DOMAIN='' > NAME='' > NETMASK='' > ESSID='any' > > /etc/modules.conf > alias eth0 orinoco_cs > > > Any advice would be fine > > Patrick > > > > -- > Knowledge in a databank,is like food which is in a deepfreeze. > Nothing comes out better than what is initially put in. > > PGP Key: http://users.pandora.be/rivendell/marquetp.gpg > Registered Linux User #44550 http://counter.li.org > > > > -- > Psyche-list mailing list > Psyche-list@redhat.com > https://listman.redhat.com/mailman/listinfo/psyche-list > -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
