Chauncey Thorn writes.... > > Hi, > check > /etc/modules.conf > alias eth1 modulename > > service network restart and see if both nic startup... Might want to check, "dmesg | grep eth" and make sure the hardware is being found also. --JC > > > On Thursday, January 16, 2003, at 05:48 PM, Linn Kubler wrote: > > > Hi, > > > > I'm trying to setup a firewall using RH8.0. I'm just installing the > > system and I've installed two nics, started the installation and when > > it > > gets to the nic configuration it only shows one nic, eth0. Shouldn't > > there be two, eth0 and eth1? Or does that come later in the process? > > > > If it does come later how do I determine which nic it's found? > > > > Am I going about this the right way? Is there a better method for > > setting up a firewall? > > > > What I'm trying to do is have one nic on the Internet side with a > > static address and the other nic will be on a local lan with another > > system running a webserver. I just want people on the Internet to be > > able to get to the website on the second system. Probably blocking > > everything else for now, this is only a temporary config. > > > > Any advice is welcome. > > > > Thanks in advance, > > Linn > > > > > > > > -- > > Psyche-list mailing list > > Psyche-list@redhat.com > > https://listman.redhat.com/mailman/listinfo/psyche-list > > > > This email has been scanned for all viruses by the MessageLabs SkyScan > > service. http://www.messagelabs.com/ > > > Chauncey Thorn > Systems Administrator > Vibe/Spin Ventures > 212-448-7397 > > > This email has been scanned for all viruses by the MessageLabs SkyScan service. http://www.messagelabs.com/ > > > > -- > Psyche-list mailing list > Psyche-list@redhat.com > https://listman.redhat.com/mailman/listinfo/psyche-list > -- Jay Crews jpc@jaycrews.com -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
