I also use 3c509b. RHL 8.0 kept my connections from 7.2, but the 3c509b would not work. I got around this problem by re-creating a network connection to use the Earthlink/TWC web access (cable). BTW, the 3com configuration utility did not work for me. I manually configured the 3c509b -- only IRQ and I/O were needed (10 and 0x240, respectively in my case). PnP is turned on in my PhoenixBIOS. 3c509b would not work with it off. (?!) Hope this helps, -Jake On Wed, 6 Nov 2002 15:12:18 -0500 "Gene C." <czarcing@cox.net> wrote: > On Wednesday 06 November 2002 14:54, Lucas > Albers wrote: > > Try compiling with the gcc296 compiler. > > This is the Redhat-7.3 compiler on the > system. > > Alias gcc gcc296 > > Then run the compile. > > I believe this is not a good idea. Mixing code > from gcc 3.2 and the old gcc > 2.96 is not supported for a reason (parameter > passing differs) and can cause > problems. > > > > I have the same problem with 3Com 3C900B, I > got it work under Redhat 7.3 > > > by > > > compile a driver downloaded from Gateway > site. but I could not compile it > > Why not use the 3c59x driver that comes from > Red Hat? I have a 3c905B > (10b7:9055) and it works fine with the 3c59x > driver. > > -- > Gene > > > > -- > Psyche-list mailing list > Psyche-list@redhat.com > https://listman.redhat.com/mailman/listinfo/psyche-list > -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
