To build the NVIDIA Drivers on RH8.0 do the following: Download the Kernel Source for your current Kernel. Copy the *.config file (For the CPU you are using) for your kernel into the /usr/src directory. Download the NVidia.SRC's then do the following: rpmbuild --rebuild NVIDIA_kernel*.src.rpm (Place the correct filename you downloaded here) rpmbuild --rebuild NVIDIA_GLX*.src.rpm (Same as above) rpm -ivh /usr/src/redhat/RPMS/i386/NVIDIA_kernel*.i386.rpm (Same as above) rpm -ivh /usr/src/redhat/RPMS/i386/NVIDIA_GLX*.i386.rpm (Same as above) And then modify your /etc/X11/XF86Config file as outlined in the README that came with the NVIDIA.RPM's Then RUN X This should help those with problems installing the NVIDIA drivers on RH8.0. Wolf |-----Original Message----- |From: Roger [mailto:roger@efn.org] |Sent: Saturday, 2 November 2002 09:08 am |To: louisg00@bellsouth.net |Cc: psyche-list@redhat.com |Subject: Re: nvidia driver for RH8 | | | |Around Fri,Nov 01 2002, at 03:51, Louis Garcia, wrote: |> This is what I get when installing the package: |> |> [root@tiger root]# rpm -i |> /usr/src/redhat/RPMS/i686/NVIDIA_kernel-1.0-3123.i686.rpm | |get NVIDIA_kernel-1.0-3123.src.rpm from nvidia, rpm -i it, |then go to /usr/src/redhat/SOURCES to find the |NVIDIA_kernel-1.0-3123.tar.gz file. |tar -xzf the file, navigate to the newly created directory |'NVIDIA_kernl-1.0-3123 and run 'make'. | | |then you can install the NVIDIA_GLX rpm | |roger ###################################################################### Attention: This e-mail message is privileged and confidential. If you are not the intended recipient please delete the message and notify the sender. Any views or opinions presented are solely those of the author. This e-mail has been scanned and cleared by MailMarshal www.marshalsoftware.com ###################################################################### -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
