On Fri, 30 May 2003, Michael B Allen wrote: > On Fri, 30 May 2003, Alex Deucher wrote: > > > are you trying to use both the LCD and the vga port for dualhead > > display or just the external port only or both the primary and the > > secondary in clone mode? > > I'm just trying to do plain vanilla analog out although the builtin LCD > is coming on and displaying a picture (sometimes). Switching between the > builtin LCD and external port doesn't quite work right. I have to init Actually, to be more precise the behavior is as follows; the backlight on the external LCD comes on, it flickers for an instant, the backlight on the builtin LCD comes on, and finally the 640x480 picture is displayed on the external LCD. No picture is displayed on the builtin LCD. Although the behavior is slightly different depending on wheather or not I reboot. If I just Ctrl-Alt-F1, init 3, init 5 there is also a 1400x1050 (good) picture on the builtin LCD. Also, I'm not sure if this is noteworthy but the BIOS has three boot display device options; "LCD", "CRT", and "Both" although I have tried all of these without any effect on the ultimate result. They do appear to control which display is initally used. Mike -- A program should be written to model the concepts of the task it performs rather than the physical world or a process because this maximizes the potential for it to be applied to tasks that are conceptually similar and, more important, to tasks that have not yet been conceived. _______________________________________________ xfree86-list mailing list xfree86-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/xfree86-list IRC: #xfree86 on irc.redhat.com
