Re: No screens found

["Pcgyver" <pcgyver@xxxxxxx>]

Sorry, here my message without doublespacing.

 

Hi,

I have installed rpms builded by M.Harris on my red hat 8.0 (i have also installed dependency).
when i do an "XFree86 -configure" and i start xwindows with the new xf86config, i have a error : no screens found.

Here my new xf86config:

Section "ServerLayout"
        Identifier "XFree86 Configured"
        Screen 0 "Screen0" 0 0
        InputDevice "Mouse0" "CorePointer"
        InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    RgbPath "/usr/X11R6/lib/X11/rgb"
    ModulePath "/usr/X11R6/lib/modules"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"   
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"   
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"   
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
    Load "dbe"
    Load "dri"

    Load "extmod"
    Load "glx"
    Load "record"
    Load "xtrap"
    Load "speedo"
    Load "type1"
EndSection

Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
EndSection

Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/mouse"
EndSection

Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "ForcePCIMode" # [<bool>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "CloneDisplay" # <i>
#Option "CloneMode" # [<str>]
#Option "CloneHSync" # [<str>]
#Option "CloneVRefresh" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "VideoKey" # <i>
#Option "ForceLegacyCRT" # <i>
    Identifier "Card0"
    Driver "ati"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon R250 If [Radeon 9000]"
    BusID "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
        Depth 1
    EndSubSection
    SubSection "Display"
        Depth 4
    EndSubSection
    SubSection "Display"
        Depth 8
    EndSubSection
    SubSection "Display"
        Depth 15
    EndSubSection
    SubSection "Display"
        Depth 16
    EndSubSection
    SubSection "Display"
        Depth 24
    EndSubSection
EndSection

I have modified this file to add display resolution, etc..   whith this change, i have a new error : not found an lcd monitor

what cant i do?

my config:
athlon xp 1600+
radeon 9000 (R250)
256mo ram
Redhat 8.0 with kernel 2.4.20

monitor iiyama a701gt


thanks

Eric.